(Go to Top Page)

The International Conference on Computational Methods 2007
Technical Program

Remark: The presenter of each paper is marked with "*".
Technical Program:   One Page (Not Separated) version
Author Index:   HERE

Session Schedule


Wednesday, April 4, 2007

ABCDEFGHI
Opening Ceremony
9:00 - 9:20
1P (Himawari, B2F)
Plenary Lecture by Professor P. Wriggers

9:20 - 10:10
Coffee Break (B1 Lobby)
10:10 - 10:30
1A (Cosmos 1, B2F)
(Organized Workshop) Meshfree/ Particle methods 1

10:30 - 12:10
1B (Cosmos 2, B2F)
(Organized Workshop) Structural Optimization 1

10:30 - 11:45
1C (Ran 1, B2F)
Computational mechanics for solids and structures 1

10:30 - 12:10
1D (Ran 2, B2F)
(Organized Session) Advances of CAE in Industry 1

10:30 - 12:10
1E (MR 1, B1F)
Computational mechanics for solids and structures 3

10:30 - 12:10
1F (MR 2, B1F)
Molecular and quantum methods

10:30 - 12:10
1G (MR 4, B1F)
(Organized Workshop) Fast multipole method 1

10:30 - 12:00
1H (MR 5, B1F)
(Organized Workshop) Free and moving boundary problems 1

10:30 - 12:10
1I (MR 6, B1F)
Meshfree/ Particle methods 3

10:30 - 12:10
Lunch
12:10 - 13:10
2A (Cosmos 1, B2F)
(Organized Workshop) Meshfree/ Particle methods 2

13:10 - 14:50
2B (Cosmos 2, B2F)
(Organized Workshop) Structural Optimization 2

13:10 - 14:25
2C (Ran 1, B2F)
Computational mechanics for solids and structures 2

13:10 - 14:30
2D (Ran 2, B2F)
(Organized Session) Advances of CAE in Industry 2

13:10 - 14:30
2E (MR 1, B1F)
Computational mechanics for solids and structures 4

13:10 - 14:30
2F (MR 2, B1F)
High-performance computing techniques 1

13:10 - 14:50
2G (MR 4, B1F)
(Organized Workshop) Fast multipole method 2

13:10 - 14:40
2H (MR 5, B1F)
(Organized Workshop) Free and moving boundary problems 2

13:10 - 14:50
2I (MR 6, B1F)
Meshfree/ Particle methods 4

13:10 - 14:50
Coffee Break (B1 Lobby)
14:50 - 15:10
3A (Cosmos 1, B2F)
(Organized Workshop) Meshfree/ Particle methods 3

15:10 - 16:30
3B (Cosmos 2, B2F)
(Organized Workshop) Structural Optimization 3

15:10 - 16:25
3C (Ran 1, B2F)
Computational heat transfer 1

15:10 - 16:30
3D (Ran 2, B2F)
Computational fluid dynamics 1

15:10 - 16:30
3E (MR 1, B1F)
Computational mechanics for solids and structures 5

15:10 - 16:30
3F (MR 2, B1F)
High-performance computing techniques 2

15:10 - 16:30
3G (MR 4, B1F)
(Organized Workshop) Fast multipole method 3

15:10 - 16:10
3H (MR 5, B1F)
(Organized Workshop) Free and moving boundary problems 3

15:10 - 16:50
3I (MR 6, B1F)
Meshfree/ Particle methods 5

15:10 - 16:30
Break (w/o coffee)
16:30 - 16:40
4A (Cosmos 1, B2F)
(Organized Workshop) Meshfree/ Particle methods 4

16:40 - 17:20
4B (Cosmos 2, B2F)
(Organized Workshop) Structural Optimization 4

16:40 - 17:55
4C (Ran 1, B2F)
Computational heat transfer 2

16:40 - 18:00
4D (Ran 2, B2F)
Computational fluid dynamics 2

16:40 - 18:40
4E (MR 1, B1F)
Computational mechanics for solids and structures 6

16:40 - 18:00
4F (MR 2, B1F)
High-performance computing techniques 3

16:40 - 18:00
4G (MR 4, B1F)
(Organized Workshop) Fast multipole method 4

16:40 - 17:40
4H (MR 5, B1F)
(Organized Workshop) Free and moving boundary problems 4

17:00 - 18:40




Thursday, April 5, 2007

ABCDEFGHI
1Sa (Cosmos 1, B2F)
Semi-Plenary Lecture by Professor T. Aoki

9:00 - 9:40
1Sb (Cosmos 2, B2F)
Semi-Plenary Lecture by Dr. O. Marques

9:00 - 9:40







Coffee Break (B1 Lobby)
9:40 - 10:00
5A (Cosmos 1, B2F)
(Organized Workshop) Meshfree/ Particle methods 5

10:00 - 11:40
5B (Cosmos 2, B2F)
(Organized Workshop) Structural Optimization 5

10:00 - 11:55
5C (Ran 1, B2F)
(Organized Session) Computational methods of waves in inhomogeneous materials

10:00 - 11:40
5D (Ran 2, B2F)
Computational fluid dynamics 3

10:00 - 12:00
5E (MR 1, B1F)
Computational mechanics for solids and structures 7

10:00 - 12:00
5F (MR 2, B1F)
(Organized Workshop) Innovative Computational Strategies 1

10:00 - 12:00
5G (MR 4, B1F)
(Organized Workshop) Fast multipole method 5

10:00 - 12:00
5H (MR 5, B1F)
(Organized Workshop) Free and moving boundary problems 5

10:00 - 11:50
5I (MR 6, B1F)
(Organized Workshop) Characterization of strength of materials and structures 1

10:00 - 11:50
Lunch
12:00 - 13:00
2P (Himawari, B2F)
Plenary Lecture by Mr. S. Ando

13:00 - 13:50
Break (w/o coffee)
13:50 - 14:20
Technical Tour (MAZDA Museum)
14:20 - 17:00
Cash Bar
17:30 - 18:30
Banqet
19:00 - 21:00



Friday, April 6, 2007

ABCDEFGHI
2Sa (Cosmos 1, B2F)
Semi-Plenary Lecture by Professor Y.Y. Kim

9:00 - 9:40
2Sb (Cosmos 2, B2F)
Semi-Plenary Lecture by Professor A. Huerta

9:00 - 9:40







Coffee Break (B1 Lobby)
9:40 - 10:00
6A (Cosmos 1, B2F)
(Organized Workshop) Meshfree/ Particle methods 6

10:00 - 11:40
6B (Cosmos 2, B2F)
Optimization 1

10:00 - 11:40
6C (Ran 1, B2F)
Computational mathematics 1

10:00 - 12:00
6D (Ran 2, B2F)
Computational fluid dynamics 4

10:00 - 12:00
6E (MR 1, B1F)
Computational mechanics for solids and structures 8

10:00 - 12:00
6F (MR 2, B1F)
(Organized Workshop) Innovative Computational Strategies 2

10:00 - 12:00
6G (MR 4, B1F)
Boundary element methods

10:00 - 12:00
6H (MR 5, B1F)
Health monitoring

10:00 -
6I (MR 6, B1F)
(Organized Workshop) Characterization of strength of materials and structures 2

10:00 - 11:50
Lunch
12:00 - 13:00
7A (Cosmos 1, B2F)
Meshfree/ Particle methods 1

13:00 - 14:40
7B (Cosmos 2, B2F)
Optimization 2

13:00 - 14:40
7C (Ran 1, B2F)
Computational mathematics 2

13:00 - 14:40
7D (Ran 2, B2F)
Computational fluid dynamics 5

13:00 - 14:40
7E (MR 1, B1F)
Computational mechanics for solids and structures 9

13:00 - 14:40
7F (MR 2, B1F)
(Organized Workshop) Innovative Computational Strategies 3

13:00 - 14:40
7G (MR 4, B1F)
Advanced finite element/ difference/ volume methods 1

13:00 - 14:40
7H (MR 5, B1F)
Computational meso/ micro/ nano mechanics 1

13:00 - 14:40
7I (MR 6, B1F)
(Organized Workshop) Characterization of strength of materials and structures 3

13:00 - 14:40
Coffee Break (B1 Lobby)
14:40 - 15:00
8A (Cosmos 1, B2F)
Meshfree/ Particle methods 2

15:00 - 16:40
8B (Cosmos 2, B2F)
Optimization 3

15:00 - 16:00
8C (Ran 1, B2F)
Computational mathematics 3 & Computational biology

15:00 - 17:20
8D (Ran 2, B2F)
Computational fluid dynamics 6

15:00 - 17:20
8E (MR 1, B1F)
Computational mechanics for solids and structures 10

15:00 - 16:40
8F (MR 2, B1F)
(Organized Workshop) Innovative Computational Strategies 4

15:00 - 17:00
8G (MR 4, B1F)
Advanced finite element/ difference/ volume methods 2

15:00 - 17:00
8H (MR 5, B1F)
Computational meso/ micro/ nano mechanics 2

15:00 - 18:20
8I (MR 6, B1F)
(Organized Workshop) Characterization of strength of materials and structures 4

15:00 - 16:40



List of Papers

Remark: The presenter of each paper is marked with "*".

Wednesday, April 4, 2007

Session 1P   Plenary Lecture by Professor P. Wriggers
Time: 9:20 - 10:10 Wednesday, April 4, 2007
Location: Himawari, B2F
Chair: Kenjiro Terada (Tohoku Univ.)

1P-1
TitleHomogenization methods and micro-scale investigations for heterogeneous and granular materials
Author*P. Wriggers, M. Hain, C. Wellmann (Univ. of Hannover, Germany)


Session 1A   (Organized Workshop) Meshfree/ Particle methods 1
Time: 10:30 - 12:10 Wednesday, April 4, 2007
Location: Cosmos 1, B2F
Chair: Guirong Liu (National Univ. of Singapore, Singapore)

1A-1 (Time: 10:30 - 11:00)
Title[Keynote] Reproducing kernel partition of unity for solving Schrödinger equation in quantum mechanics
Author*Jiun-Shyan Chen, Wei Hu (Univ. of California, Los Angeles, United States)

1A-2 (Time: 11:00 - 11:30)
Title[Keynote] Multiscale modeling of heterogeneous media using meshfree enrichments
AuthorMichael Macri (Union College, United States), *Suvranu De (Rensselaer Polytechnic Institute, United States)

1A-3 (Time: 11:30 - 11:50)
TitleA Hamiltonian particle method for fluid and solid dynamics
Author*Yukihito Suzuki, Seiichi Koshizuka (Univ. of Tokyo, Japan)

1A-4 (Time: 11:50 - 12:10)
TitleImpact analyses using smoothed particle hydrodynamics method
Author*Seiya Hagihara, Ryoichi Saruwatari, Hirotsugu Tateishi (Saga Univ., Japan)


Session 2A   (Organized Workshop) Meshfree/ Particle methods 2
Time: 13:10 - 14:50 Wednesday, April 4, 2007
Location: Cosmos 1, B2F
Chairs: Jiun-Shyan Chen (Univ. of California, Los Angeles, United States), Suvranu De (Rensselaer Polytechnic Institute, United States)

2A-1 (Time: 13:10 - 13:40)
Title[Keynote] The Method of Particular Solution for solving Berger Plate Equation
Author*C.S. Chen (Univ. of Southern Mississippi, United States)

2A-2 (Time: 13:40 - 14:10)
Title[Keynote] Intrinsic enrichment of meshfree approximation for interfacial discontinuous derivative
AuthorYoung-Cheol Yoon (Myongji College, Republic of Korea), Do Wan Kim (Hanyang Univ., Republic of Korea), *Sang-Ho Lee (Yonsei Univ., Republic of Korea)

2A-3 (Time: 14:10 - 14:30)
TitleNumerical Analysis of Underwater Explosion Problem using Moving Least Squares-Smoothed Particle Hydrodynamics with Discontinuous Derivative Basis Function
Author*Gaku Hashimoto, Hirohisa Noguchi (Keio Univ., Japan)

2A-4 (Time: 14:30 - 14:50)
TitleTreatment of Two-phase Flow and Edge Effect on SPH
Author*Haruki Obara, Mariko Honda, Jyun Suemura (Toyama Univ., Japan)


Session 3A   (Organized Workshop) Meshfree/ Particle methods 3
Time: 15:10 - 16:30 Wednesday, April 4, 2007
Location: Cosmos 1, B2F
Chairs: C.S. Chen (Univ. of Southern Mississippi, United States), Sang-Ho Lee (Yonsei Univ., Republic of Korea)

3A-1 (Time: 15:10 - 15:40)
Title[Keynote] Reproducing Kernel Elements in Geometry, Data Modeling and Isogeometric Analysis
Author*Daniel C. Simkins, Jr., Abhishek Kumar, Nathan Collier, Lisa B. Whitenack (Univ. of South Florida, United States)

3A-2 (Time: 15:40 - 16:10)
Title[Keynote] Geometrically exact analysis of structures: a meshless alternative
Author*Carlos Tiago (Instituto Superior Técnico, Universidade Técnica de Lisboa, Portugal), Paulo Pimenta (Escola Politécnica, Universidade de São Paulo, Brazil)

3A-3 (Time: 16:10 - 16:30)
TitleApplications of MLSA with Discontinuous Derivative Basis Function to Topology Optimization with Multiple Materials
Author*Zhiqian ZHANG, Hirohisa NOGUCHI (Keio Univ., Japan)


Session 4A   (Organized Workshop) Meshfree/ Particle methods 4
Time: 16:40 - 17:20 Wednesday, April 4, 2007
Location: Cosmos 1, B2F
Chair: Daniel C. Simkins, Jr. (Univ. of South Florida, United States)

4A-1 (Time: 16:40 - 17:00)
TitleSaturated-unsaturated seepage analysis by a mesh-free method
Author*Hideyuki Sakurai (Inst. of Tech., Shimizu Co., Japan)

4A-2 (Time: 17:00 - 17:20)
TitleSimulated Breakup of Injected Liquid Fuel in Automobile Engines
Author*Eiji Ishii, Toru Ishikawa, Yoshiyuki Tanabe (Hitachi, Ltd., Japan)


Session 1B   (Organized Workshop) Structural Optimization 1
Time: 10:30 - 11:45 Wednesday, April 4, 2007
Location: Cosmos 2, B2F
Chair: Seonho Cho (Seoul National Univ.)

1B-1 (Time: 10:30 - 10:55)
TitleInverse design of magnetic unit-materials for prescribed magnetic properties
AuthorJae Seok Choi, *Jeonghoon Yoo (Yonsei Univ., Republic of Korea)

1B-2 (Time: 10:55 - 11:20)
TitleStructural optimization based on topology optimization techniques using frame and panel elements considering element properties.
Author*Akihiro Takezawa (Hiroshima Univ., Japan), Shinji Nishiwaki, Kazuhiro Izui, Masataka Yoshimura (Kyoto Univ., Japan)

1B-3 (Time: 11:20 - 11:45)
TitleDesign of Tensegrity Structures by Optimization Methods
Author*Makoto Ohsaki, Jingyao Zhang (Kyoto Univ., Japan)


Session 2B   (Organized Workshop) Structural Optimization 2
Time: 13:10 - 14:25 Wednesday, April 4, 2007
Location: Cosmos 2, B2F
Chair: Jeonghoon Yoo (Yonsei Univ.)

2B-1 (Time: 13:10 - 13:35)
TitleOptimization of steel building frames by genetic algorithm with weigh limit
Author*Kiichiro Sawada, Qingsong Dai, Akira Matsuo (Hiroshima Univ., Japan)

2B-2 (Time: 13:35 - 14:00)
TitleNew Particle Swarm Optimization(Adaptive Range Particle Swarm Optimization: ARPSO)
AuthorSatoshi Kitayama, *Koetsu Yamazaki (Kanazawa Univ., Japan)

2B-3 (Time: 14:00 - 14:25)
TitleStructural morphogenesis by the genetic algorithms selecting decent solution with diversity
Author*Toshio Honma (Kagoshima Univ., Japan), Kenta Nozui (Shimizu Co., Japan)


Session 3B   (Organized Workshop) Structural Optimization 3
Time: 15:10 - 16:25 Wednesday, April 4, 2007
Location: Cosmos 2, B2F
Chair: Shinji Nishiwaki (Kyoto Univ.)

3B-1 (Time: 15:10 - 15:35)
TitleGlobal Optimization Algorithm for Worst-Case Limit Analysis of Trusses under Load Uncertainties
Author*Yoshihiro Kanno (Univ. of Tokyo, Japan), Izuru Takewaki (Kyoto Univ., Japan)

3B-2 (Time: 15:35 - 16:00)
TitleAn Application of Shape Optimization Technique Based on Traction Method for Thermal Deformation Minimization Problem
Author*Makoto Tsukino, Kenzen Takeuchi (Quint Co., Japan)

3B-3 (Time: 16:00 - 16:25)
TitleShape Design Sensitivity Analysis Method Based on Isogeometric Approach
Author*Seonho Cho, Seung-Hyun Ha (Seoul National Univ., Republic of Korea)


Session 4B   (Organized Workshop) Structural Optimization 4
Time: 16:40 - 17:55 Wednesday, April 4, 2007
Location: Cosmos 2, B2F
Chair: Yoshihiro Kanno (Univ. of Tokyo)

4B-1 (Time: 16:40 - 17:05)
TitleMetamodel Based Design Optimization
Author*Tae Hee Lee, Jae Jun Jung (Hanyang Univ., Republic of Korea)

4B-2 (Time: 17:05 - 17:30)
TitleTopology Optimization of Structural Members for Crashworthiness
AuthorYohei Tsuganezawa, Kaoru Kobayashi (Seikei Univ. Graduate School, Japan), *Kohei Yuge (Seikei Univ., Japan)

4B-3 (Time: 17:30 - 17:55)
TitleShape optimization using NURBS of space membrane against wrinkling
AuthorTakeshi AKITA, Daisuke HIRAJO, *Nozomu KOGISO (Osaka Prefecture Univ., Japan)


Session 1C   Computational mechanics for solids and structures 1
Time: 10:30 - 12:10 Wednesday, April 4, 2007
Location: Ran 1, B2F
Chairs: Ivanka Paskaleva (Bulgarian Academy of Sciences), Sergey M. Bosiakov (Byelorussian State Univ.)

1C-1 (Time: 10:30 - 10:50)
TitleBoundary integral equation method for site effects assessment:Case study for different regions on the Sofia City
AuthorPetia Dineva, *Ivanka Paskaleva (Bulgarian Academy of Sciences, Bulgaria)

1C-2 (Time: 10:50 - 11:10)
TitleComputer modeling of the three-dimensional wave movements raised by a non-stationary source in the homogeneous anisotropic environment
Author*Sergey Bosiakov (Byelorussian State Univ., Belarus)

1C-3 (Time: 11:10 - 11:30)
TitleReference frequencies for the validation of numerical solutions to the transverse vibrations of tapered Timoshenko beam-columns
Author*Andrew Watson (Loughborough Univ., Great Britain), Ichiro Ario (Hiroshima Univ., Japan)

1C-4 (Time: 11:30 - 11:50)
TitleTHE METHOD OF EXTERNAL EXCITATION FOR PROBLEMS OF FREE VIBRATIONS OF NON-HOMOGENEOUS TIMOSHENKO BEAMS
Author*Sergiy Reutskiy (Science and Technology Center of Magnetism of Technical Objects. The National Academy of Science of Ukraine, Ukraine)

1C-5 (Time: 11:50 - 12:10)
TitleComputation of Non-Smooth Dynamical Systems
Author*Marian Wiercigroch, Ekaterina E Pavlvskaia (Univ. of Aberdeen, Great Britain)


Session 2C   Computational mechanics for solids and structures 2
Time: 13:10 - 14:30 Wednesday, April 4, 2007
Location: Ran 1, B2F
Chairs: Kohei Yuge (Seikei Univ., Japan), Tatsuhiko Ine (National Research Institute for Earth Science and Disaster Prevention, Japan)

2C-1 (Time: 13:10 - 13:30)
TitleAlterable-element method for vehicle-bridge interaction considering the transient jump of wheel
Author*Xue-Wen Liu, Chuan Wu, Xing-Chun Huang (Shanghai Jiaotong Univ., China)

2C-2 (Time: 13:30 - 13:50)
TitleComputational modeling of the Baziling branched tunnel under blast loading
Author*Shucai Li (Shandong Univ., China), Shugang Wang (Univ. of Wisconsin-Milwaukee, United States), Gang Wang (Shandong Univ., China)

2C-3 (Time: 13:50 - 14:10)
TitleDynamic analysis for elasto-plastic behavior of the knee brace damper experiment under cyclic axial loading
Author*Tatsuhiko Ine (National Research Institute for Earth Science and Disaster Prevention (NIED), Japan), Kohei Yuge, Keishi Itoh (Seikei Univ., Japan), Koichi Kajiwara (National Research Institute for Earth Science and Disaster Prevention (NIED), Japan)

2C-4 (Time: 14:10 - 14:30)
TitleDynamic collapse analysis for elasto-plastic behaviors of the steel frame under seismic loads using ASI-Gauss technique
Author*Tatsuhiko Ine (National Research Institute for Earth Science and Disaster Prevention (NIED), Japan), Daigoro Isobe, Naoki Katahira (Univ. of Tsukuba, Japan), Koichi Kajiwara (National Research Institute for Earth Science and Disaster Prevention (NIED), Japan)


Session 3C   Computational heat transfer 1
Time: 15:10 - 16:30 Wednesday, April 4, 2007
Location: Ran 1, B2F
Chairs: Do Wan Kim (, Democratic People's Republic of Korea), D. C. Lo (National Kaohsiung Marine Univ., Taiwan)

3C-1 (Time: 15:10 - 15:30)
TitleNumerical modeling of flow, heat and mass transfer in natural draft wet-cooling towers
Author*Adam F. Klimanek (Univ. of Leeds, Great Britain), Ryszard A. Bialecki (Silesian Univ. of Tech., Poland)

3C-2 (Time: 15:30 - 15:50)
TitleAnalytic approach to heat conduction problem for multiply layered materials with high aspect ratio thickness
Author*Do Wan Kim, Ji-Eun Lee, Hye Keun Oh (Hanyang Univ., Republic of Korea)

3C-3 (Time: 15:50 - 16:10)
TitleAdaptive Time Stepping Control with Intrinsic Function of Automatic Relaxation for Solidification Processes by Utilizing the Extreme of Local Time Truncation Error
AuthorLong-Sun Chao, *Hsiun-Chang Peng (National Cheng Kung Univ., Taiwan)

3C-4 (Time: 16:10 - 16:30)
TitleHigh resolution of 2D natural convection in an inclined cavity by the DQ method
Author*D. C. Lo (Institute of Navigation Science and Technology, National Kaohsiung Marine Univ., Taiwan), D. L. Young (National Taiwan Univ., Taiwan)


Session 4C   Computational heat transfer 2
Time: 16:40 - 18:00 Wednesday, April 4, 2007
Location: Ran 1, B2F
Chairs: Do Wan Kim (Hanyang Univ., Republic of Korea), Adam F. Klimanek (Univ. of Leeds, Great Britain)

4C-1 (Time: 16:40 - 17:00)
TitleBoundary element method in slow changing domains
AuthorEleonora K. Bevza, *Olexandr O. Kochubey, Mykola V. Polyakov, Dmytro V. Yevdokymov (Dniepropetrovsk National Univ., Ukraine)

4C-2 (Time: 17:00 - 17:20)
TitleEffect of Prandtl number on heat transfer characteristics in an axisymmetric sudden expansion
Author*Khalid Alammar (King Saud Univ., Saudi Arabia)

4C-3 (Time: 17:20 - 17:40)
TitleSecond Law Analysis of Incompressible Viscous Flow Through an Inclined Channel with Isothermal Walls
Author*Moloy Banerjee (College of Engineering and Management, Kolaghat, India), Runu Banerjee (Jadavpur Univ., India)

4C-4 (Time: 17:40 - 18:00)
TitleThermal Analysis of Steel Bridge under Asphalt Pavement Procedure with Equivalent Heat Source
AuthorHeungJin Chung, *ByungChan Ryu (JeonJu Univ., Republic of Korea), Wan-Hoon Lee (ChungWoon Univ., Republic of Korea)


Session 1D   (Organized Session) Advances of CAE in Industry 1
Time: 10:30 - 12:10 Wednesday, April 4, 2007
Location: Ran 2, B2F
Chair: Eri Nishikata (HONDA R&D Co. Ltd., Japan)

1D-1 (Time: 10:30 - 11:10)
Title[Keynote] Particle Methods in LS-DYNA -Current & Future
Author*C. T. Wu, Young Guo, F. Delpin, J. Lacome, H. S. Lu (Livermore Software Technology Co., United States)

1D-2 (Time: 11:10 - 11:50)
Title[Keynote] Post-buckling Analyses of Elastic Cylindrical Shells under Axial Compression
Author*Takaya Kobayashi, Yasuko Mihara (Mechanical Design & Analysis Co., Japan)

1D-3 (Time: 11:50 - 12:10)
TitleNumerical Simulation of Multi-layer Compression Molding
Author*Hotaka Fukabori (Toyo-Seikan Kaisha, LTD., Japan)


Session 2D   (Organized Session) Advances of CAE in Industry 2
Time: 13:10 - 14:30 Wednesday, April 4, 2007
Location: Ran 2, B2F
Chair: Hiroki Umeda (Canon inc., Japan)

2D-1 (Time: 13:10 - 13:50)
Title[Keynote] An Overview of the ASME Guide for Verification and Validation in Computational Soilid Mechanics
Author*Leonard Schwer (Schwer Engineering & Consulting Services, United States)

2D-2 (Time: 13:50 - 14:10)
TitleDevelopment of System Uncertainty Analysis Tool for Cost Effective and Quantified Risk Based Designs
Author*Vinod Nagpal, William Strack (N&R Engineering, United States)

2D-3 (Time: 14:10 - 14:30)
TitleCase example of mountain bike(MTB) development using topology optimization design technique
Author*Eri Nishikata (HONDA R&D Co. Ltd., Japan)


Session 3D   Computational fluid dynamics 1
Time: 15:10 - 16:30 Wednesday, April 4, 2007
Location: Ran 2, B2F
Chairs: Takayuki Aoki (Tokyo Inst. of Tech., Japan), S. Seng Leong (Univ. of New South Wales, Australia)

3D-1 (Time: 15:10 - 15:30)
TitleDevelopment of Optimized WCNS and Evaluation of Resolution of the Optimized and the High Order WCNS
Author*Taku Nonomura (Univ. of Tokyo, Japan), Kozo Fujii (ISAS/JAXA, Japan)

3D-2 (Time: 15:30 - 15:50)
TitleCFD Simulations of Transient ignition of Solid Rocket Motors
AuthorHod Wirzberger , *Sara Yaniv (IMI Ltd., Israel)

3D-3 (Time: 15:50 - 16:10)
TitleThe numeric simulation on the pneumatic elasticity for the blade of the special axial flow fan in the subway
Author*Jun Mao, Liguo Yang (Beijing Jiaotong Univ., China)

3D-4 (Time: 16:10 - 16:30)
TitleAnalysis and optimization of paper vacuum drying process by application of advanced numerical modeling approach
Author*Krzysztof Kasza, Piotr Saj, Robert Sekula (ABB Corporate Research, Poland), Andrzej J Nowak, Zbigniew Bulinski (Silesian Univ. of Tech., Poland)


Session 4D   Computational fluid dynamics 2
Time: 16:40 - 18:40 Wednesday, April 4, 2007
Location: Ran 2, B2F
Chairs: Hidetoshi Nishida (Kyoto Inst. of Tech., Japan), Sara Yaniv (IMI Ltd., Israel)

4D-1 (Time: 16:40 - 17:00)
TitleFlow analysis in micro-channel by a fringe element reconstruction method
AuthorDu-soon Choi, *Yong-Taek Im (Korea Advanced Inst. of Science and Tech., Republic of Korea)

4D-2 (Time: 17:00 - 17:20)
TitleDirect solution of cylindrical elliptic Poisson equation
Author*S. Seng Leong (Univ. of New South Wales, Australia)

4D-3 (Time: 17:20 - 17:40)
TitleChaos of a single burning particle in the stratosphere
Author*Xiaoliang Xu , Haiming Huang (Beijing Jiaotong Univ., China)

4D-4 (Time: 17:40 - 18:00)
TitleBoundary layer solutions around body of revolution
Author*Canan Harmanci, M. Adil Yükselen (Istanbul Technical Univ., Turkey)

4D-5 (Time: 18:00 - 18:20)
TitleSpectral Embedded Boundary Method for Two-dimensional Incompressible Navier-Stokes Equations
Author*Fereidoun Sabetghadam, Shervin Sharafatmandjoor (Azad Univ., Iran), Farhang Norouzi (Tehran Univ., Iran)

4D-6 (Time: 18:20 - 18:40)
TitleSeepage analysis with discrete singular convolution algorithm in isotropic environment
Author*Mahmood Rabbani Bidgoli, Reza Attarnejad (Univ. of Tehran, Iran)


Session 1E   Computational mechanics for solids and structures 3
Time: 10:30 - 12:10 Wednesday, April 4, 2007
Location: MR 1, B1F
Chairs: Yuki Ozawa (Ritsumeikan Univ.), Ichiro Ario (Hiroshima Univ.)

1E-1 (Time: 10:30 - 10:50)
TitleStudy on analytical method for wooden structures with sheathed shear walls
Author*Shinya Matsumoto (Hiroshima Univ., Japan), Yoshinobu Fujitani (Hiroshima International Univ., Japan)

1E-2 (Time: 10:50 - 11:10)
TitleInteraction of stress distribution in unit-based tension structures
Author*Yuki Ozawa (Ritsumeikan Univ., Japan), Ken'ichi Kawaguchi (Univ. of Tokyo, Japan)

1E-3 (Time: 11:10 - 11:30)
TitleStatistics analysis of random structures with repeated eigenvalues
Author*Wenjun Liu (Tongji Univ., China), Bin Huang (Wuhan Univ. of Tech., China)

1E-4 (Time: 11:30 - 11:50)
TitleSufficient Condition in Stability of Inextensible Euler Elasticas
Author*M. Jin, Z.B. Bao (Beijing Jiaotong Univ., China)

1E-5 (Time: 11:50 - 12:10)
TitleNonlinear Dynamic Snap-through with a Saddle Singular Point on DUFFING's System
Author*Ichiro Ario (Hiroshima Univ., Japan), Andrew Watson (Loughborough Univ., Great Britain)


Session 2E   Computational mechanics for solids and structures 4
Time: 13:10 - 14:30 Wednesday, April 4, 2007
Location: MR 1, B1F
Chairs: Maenghyo Cho (Republic of Korea), Manabu Uchiyama (Shimizu Co.)

2E-1 (Time: 13:10 - 13:30)
TitleOn New Symplectic Elasticity Approach for Exact Bending Solutions of Rectangular Thin Plates. Plates with Two opposite Sides Simply Supported
AuthorC.W. Lim, *Shuang Cui (City Univ. of Hong Kong, Hong Kong)

2E-2 (Time: 13:30 - 13:50)
TitleNonlinear Buckling Analysis of Imperfect Non-Shallow Spherical Shells
Author*Manabu Uchiyama (Shimizu Co., Japan), Seishi Yamada (Toyohashi Univ. of Tech., Japan)

2E-3 (Time: 13:50 - 14:10)
TitleA C0 discontinuous Galerkin formulation for thin shells
Author*Nguyen Tien Dung, Garth Nathan Wells (Delft Univ. of Tech., Netherlands)

2E-4 (Time: 14:10 - 14:30)
TitleThe application of reduced system based on the higher order zig-zag theory shell theory for delaminations
AuthorJinho Oh, *Maenghyo Cho, Hyungi Kim (Seoul National Univ., Republic of Korea)


Session 3E   Computational mechanics for solids and structures 5
Time: 15:10 - 16:30 Wednesday, April 4, 2007
Location: MR 1, B1F
Chairs: Mitsugu Todo (Kyushu Univ.), Kohei Yuge (Seikei Univ.)

3E-1 (Time: 15:10 - 15:30)
TitleStress Analysis of 3D Mandibular Model with Dental Implants by Finite Element Method
Author*Kohei Irie, Mitsugu Todo, Yasuyuki Matsushita (Kyushu Univ., Japan)

3E-2 (Time: 15:30 - 15:50)
TitleDynamic Stress Analysis of new Knee Prosthesis under Deep Flexion
Author*Kenzo Toshiyuki, Mitsugu Todo (Kyushu Univ., Japan), Takao Hotokebuchi (Saga Univ., Japan)

3E-3 (Time: 15:50 - 16:10)
TitleDynamic Behavior of the Human Head during Impact
Author*Dai Watanabe (Seikei Univ. Graduate School, Japan), Kohei Yuge (Seikei Univ., Japan), Tetsuya Nishimoto (Nihon Univ., Japan), Shigeyuki Murakami, Hiroyuki Takao (Jikei Univ. School of Medicine, Japan)

3E-4 (Time: 16:10 - 16:30)
TitleEffect of distance from the support on the damage mechanism of clamped circular polycarbonate armor plates
Author*Qasim Shah (International Islamic Univ. Malaysia, Malaysia), Yousif Abakr (Univ. of Nottingham, Malaysia, Malaysia)


Session 4E   Computational mechanics for solids and structures 6
Time: 16:40 - 18:00 Wednesday, April 4, 2007
Location: MR 1, B1F
Chairs: Xian Chen (Kyushu Univ.), L-X Li (Xi'an Jiaotong Univ.)

4E-1 (Time: 16:40 - 17:00)
TitleDevelopment of Hybrid Stress RC Composite Beam-Column Element Based on Timoshenko's Theory
Author*Yukio Kitano, Kazuo Kondoh (Hiroshima Univ., Japan)

4E-2 (Time: 17:00 - 17:20)
TitleA robust finite element algorithm to pass patch test in contact analysis
Author*Xian Chen (Kyushu Univ., Japan), Hirohisa Noguchi (Keio Univ., Japan), Toshiaki Hisada (Univ. of Tokyo, Japan)

4E-3 (Time: 17:20 - 17:40)
TitleSmoothed finite element method (SFEM) for 2D solids problems
Author*Keyang Dai (Singapore-MIT Alliance (SMA), Singapore), G. R. Liu (National Univ. of Singapore, Singapore)

4E-4 (Time: 17:40 - 18:00)
TitleApplication of the generalized infinite element method to unbounded elasto-static problems
Author*Luxian Li (Xi'an Jiaotong Univ., China), Sunao Kunimatsu (National Institute of Advanced Industrial Science and Technology (AIST), Japan), Aiqin Wang (Xi'an Jiaotong Univ., China)


Session 1F   Molecular and quantum methods
Time: 10:30 - 12:10 Wednesday, April 4, 2007
Location: MR 2, B1F
Chairs: Rachid Belkada (JST-KFPT Keihanna, Inc, Japan), Won Ha Moon (Samsung Electro-Mechanics, Republic of Korea)

1F-1 (Time: 10:30 - 10:50)
TitleParallel computation method for new finite element analysis with stress-strain database based on the first principle density function theory
Author*Naohiro Toda (Osaka Univ./Sumitomo Electric Industries, Ltd., Japan), Shigenobu Ogata (Osaka Univ., Japan), Hajime Kimizuka (Nanosimulation Center, Engineering Technology Division, JRI solutions, Limited, Japan), Yoji Shibutani (Osaka Univ., Japan)

1F-2 (Time: 10:50 - 11:10)
TitleMolecular-dynamics study of sintering of Ni nanoparticles
Author*Won Ha Moon, Hee Soo Kim, Chul Tack Lim, Chang Hwan Choi (Samsung Electro-Mechanics, Republic of Korea)

1F-3 (Time: 11:10 - 11:30)
TitlePolarizability of zeolitic Brønsted acidic sites
Author*Francisco Torrens (Universitat de Valencia-ICMol, Spain), Gloria Castellano (Universidad Politécnica de Valencia-Universidad Católica de Valencia San Vicente Mártir, Spain)

1F-4 (Time: 11:30 - 11:50)
TitleQuantum melting in electron-hole plasmas by direct path integral Monte Carlo method
Author*Vladimir Filinov (Institute for High Energy Density RAS, Russian Federation), Michael Bonitz (Christian-Albrechts-Universitat zu Kiel, Germany), Vladimir Fortov (Institute for High Energy Density RAS, Russian Federation), Holger Fehske (Ernst-Moritz-Arndt-Universitat, Germany), Pavel Levashov (Institute for High Energy Density RAS, Russian Federation)

1F-5 (Time: 11:50 - 12:10)
TitleEfficient Scheme for Ab Initio Calculations of Large System: Molecule/Metal Interface
Author*Rachid Belkada (JST-KFPT, Japan), Yoshiyuki Shirakawa (Doshisha Univ., Japan), Masanori Kohyama, Shingo Tanaka (AIST-Kansai, Japan), Juske Hidaka (Doshisha Univ., Japan)


Session 2F   High-performance computing techniques 1
Time: 13:10 - 14:50 Wednesday, April 4, 2007
Location: MR 2, B1F
Chairs: Kengo Nakajima (Univ. of Tokyo, Japan), Mitsuhiro Makino (Fujitsu Ltd., Japan)

2F-1 (Time: 13:10 - 13:30)
TitleTraining BP neural networks using the gradient descent method with the optimal stepsize
Author*Liang Gong (Shanghai Jiaotong Univ., China), Guo-xiang Meng (SMC Co., Japan)

2F-2 (Time: 13:30 - 13:50)
TitleObject-oriented interface of high-performance parallel computing for linear algebra
Author*Yasuhiro Nakahara, Teruyoshi Washizawa (Canon inc., Japan)

2F-3 (Time: 13:50 - 14:10)
TitleConvergence stability of ib_IC(0,tol) decomposition without extra fill-ins based on norm estimation for inverse of lower triangular matrix
Author*Seiji Fujino, Akira Shiode (Kyushu Univ., Japan)

2F-4 (Time: 14:10 - 14:30)
TitleThe Filter Diagonalization Method by the Shifted Inverses
Author*Hiroshi Murakami (Tokyo Metropolitan Univ., Japan)

2F-5 (Time: 14:30 - 14:50)
TitleParallelization of AMG for a Meshfree Discretization
AuthorSuely Oliveira (Univ. of Iowa, United States), Koung Hee Leem (Southern Illinois Univ., Edwardsville, United States), *Takako Soma (Illinois College, United States)


Session 3F   High-performance computing techniques 2
Time: 15:10 - 16:30 Wednesday, April 4, 2007
Location: MR 2, B1F
Chairs: Hiroshi Okuda (Univ. of Tokyo, Japan), Takumi Washio (Univ. of Tokyo, Japan)

3F-1 (Time: 15:10 - 15:30)
TitleA real-time computation technique using reduced-basis approximation and asymptotic error estimation
AuthorGui-Rong Liu, *Khin Zaw (National Univ. of Singapore, Singapore), D.B.P Huynh (Singapore-MIT Alliance (SMA), Singapore)

3F-2 (Time: 15:30 - 15:50)
TitleAcceleration of vortex methods calculation using a special-purpose computer and FMM
Author*Tarun Kumar Sheel, Kenji Yasuoka, Shinnosuke Obi (Keio Univ., Japan)

3F-3 (Time: 15:50 - 16:10)
TitleSimulation of the elastic wave propagation by 3D FEM with moving least square interpolants and parallel computing
Author*Masafumi Katou, Toshifumi Matsuoka, Hitoshi Mikada, Yoshinori Sanada, Yuzuru Ashida (Kyoto Univ., Japan)

3F-4 (Time: 16:10 - 16:30)
TitleA highly accurate solver for the mixed-boundary potential problem and singular problem in arbitrary plane domain
Author*Chein-Shan Liu (National Taiwan Ocean Univ., Taiwan)


Session 4F   High-performance computing techniques 3
Time: 16:40 - 18:00 Wednesday, April 4, 2007
Location: MR 2, B1F
Chairs: Seiji Fujino (Kyushu Univ., Japan), Hiroshi Murakami (Tokyo Metropolitan Univ., Japan)

4F-1 (Time: 16:40 - 17:00)
TitleLarge scale parallel FEM analysis of high frequency electromagnetic field in an environment
Author*Amane Takei, Shinobu Yoshimura (Univ. of Tokyo, Japan), Hiroshi Kanayama (Kyushu Univ., Japan)

4F-2 (Time: 17:00 - 17:20)
TitleThe performance of 10Million elements car model by MPP version of LS-DYNA on Fujitsu PRIMEPOWER
Author*Mitsuhiro Makino (Fujitsu Ltd., Japan)

4F-3 (Time: 17:20 - 17:40)
TitleImplementation of 3D parallel elasto-plastic finite element method on PC cluster
Author*Z.L. Ru, H.B. Zh (Henan Polytechnic Univ., China)

4F-4 (Time: 17:40 - 18:00)
TitleFloorplanning and Organization of Grid Resource Management
AuthorXiaoshe Dong, *Yinfeng Wang, Weiqing Dong (Xi'an Jiaotong Univ., China)


Session 1G   (Organized Workshop) Fast multipole method 1
Time: 10:30 - 12:00 Wednesday, April 4, 2007
Location: MR 4, B1F
Chair: Naoshi Nishimura (Kyoto Univ., Japan)

1G-1 (Time: 10:30 - 11:30)
Title[Special Guest Speaker] Fast Integral Equation Solvers in Computational Electromagnetics: Physics and Computer Science Issues for Ultra Large Scale Problems
Author*Weng Cho Chew (Univ. Illinois, United States)

1G-2 (Time: 11:30 - 12:00)
TitleA Study of the Computational Accuracy of the Multilevel Fast Multipole Algorithm
Author*Shinichiro OHNUKI (Nihon Univ., Japan), Weng Cho CHEW (Univ. of Illinois, Urbana-Champaign, United States)


Session 2G   (Organized Workshop) Fast multipole method 2
Time: 13:10 - 14:40 Wednesday, April 4, 2007
Location: MR 4, B1F
Chair: Naoshi Nishimura (Kyoto Univ., Japan)

2G-1 (Time: 13:10 - 13:40)
TitleAnalysis of electric field distribution induced by 50Hz magnetic fields utilizing Fast-Multipole Surface-Charge-simulation Method for voxel models
Author*Shoji Hamada, Tetsuo Kobayashi (Kyoto Univ., Japan)

2G-2 (Time: 13:40 - 14:10)
TitleLarge-scale and Highly Accurate Electromagnetic Field Computation by the Fast Multipole Method for Practical Electric Machine Design
Author*Yasuhito Takahashi, Shinji Wakao (Waseda Univ., Japan)

2G-3 (Time: 14:10 - 14:40)
TitleEffect of tree data structures and p-adaptivity on fast mutipole method
Author*J.M. Zhang, Masataka Tanaka (Shinshu Univ., Japan)


Session 3G   (Organized Workshop) Fast multipole method 3
Time: 15:10 - 16:10 Wednesday, April 4, 2007
Location: MR 4, B1F
Chair: Weng Cho Chew (Univ. of Illinois, United States)

3G-1 (Time: 15:10 - 15:40)
TitleThe application of a fast multipole algorithm to the computation of scattering from many objects
Author*Norimasa NAKASHIMA, Mitsuo TATEIBA (Kyushu Univ., Japan)

3G-2 (Time: 15:40 - 16:10)
TitleApplication of the fast multipole method to the domain decomposition boundary element sound field analysis
Author*Yosuke Yasuda, Tetsuya Sakuma (Univ. of Tokyo, Japan)


Session 4G   (Organized Workshop) Fast multipole method 4
Time: 16:40 - 17:40 Wednesday, April 4, 2007
Location: MR 4, B1F
Chair: Naoshi Nishimura (Kyoto Univ., Japan)

4G-1 (Time: 16:40 - 17:10)
TitleOn a Periodic FMM for Wave Problems
Author*Yoshihiro Otani, Naoshi Nishimura (Kyoto Univ., Japan)

4G-2 (Time: 17:10 - 17:40)
TitleFast Multipole Method for Molecular Dynamics Simulations
AuthorAmir Ali Kia, *Eric Felix Darve (Stanford Univ., United States)


Session 1H   (Organized Workshop) Free and moving boundary problems 1
Time: 10:30 - 12:10 Wednesday, April 4, 2007
Location: MR 5, B1F
Chair: Kazuo Kashiyama (Chuo Univ., Japan)

1H-1 (Time: 10:30 - 11:10)
Title[Keynote] Advances in large deformation interface handling for fluid structure interaction problems
Author*Wolfgang A. Wall, Axel Gerstenberger, Peter Gamnitzer (Chair for Computational Mechanics, TU Munich, Germany)

1H-2 (Time: 11:10 - 11:40)
TitleFluid-structure interaction analysis of the relationship between the inflow angle and energetic efficiency of the left ventricle
Author*Hiroshi Watanabe, Seiryo Sugiura, Toshiaki Hisada (Univ. of Tokyo, Japan)

1H-3 (Time: 11:40 - 12:10)
TitleLagrange Multiplier Approach to Fluid-Structure Interaction Problems of Heart Valves
Author*Takumi Washio (JST / Univ. of Tokyo, Japan), Toshiaki Hisada (Univ. of Tokyo, Japan)


Session 2H   (Organized Workshop) Free and moving boundary problems 2
Time: 13:10 - 14:50 Wednesday, April 4, 2007
Location: MR 5, B1F
Chair: Wolfgang Wall (TU Munich, Germany)

2H-1 (Time: 13:10 - 13:50)
Title[Keynote] Hysteretic behavior of circular cylinder undergoing vortex-induced vibration at low Reynolds numbers
AuthorTK Prasanth, *Sanjay Mittal (IIT Kanpur, India)

2H-2 (Time: 13:50 - 14:20)
TitleMarker integration characteristic Galerkin finite element method for hyperelasticity
Author*Takahiro Yamada, Takayuki Akiyama, kazumi Matsui (Yokohama National Univ., Japan)

2H-3 (Time: 14:20 - 14:50)
TitleFull Eulerian formulation for solid-fluid interaction
Author*Shigenobu Okazawa, Kenji Nakao (Hiroshima Univ., Japan), Rafael Doig (ThyssenKrupp Marine Systems, Germany)


Session 3H   (Organized Workshop) Free and moving boundary problems 3
Time: 15:10 - 16:50 Wednesday, April 4, 2007
Location: MR 5, B1F
Chair: Antonio Huerta (Universitat Politecnica de Catalunya, Spain)

3H-1 (Time: 15:10 - 15:50)
Title[Keynote] Robust Discretization Methods for Moving-Boundary Flow Simulation
Author*Marek Behr, Eric Borrmann (RWTH Aachen Univ., Germany)

3H-2 (Time: 15:50 - 16:20)
TitleTwo-Phase Flow Finite Element Analysis Based on a Phase-Field Model
Author*Junichi Matsumoto, Naoki Takada (National Institute of Advanced Industrial Science and Technology (AIST), Japan)

3H-3 (Time: 16:20 - 16:50)
TitleA Semi-Lagrange Galerkin Method for Free Interface Problems
Author*Hiroshi Okumura (Univ. of Toyama, Japan), Akira Maruoka (Hachinohe National College of Tech., Japan), Katsushi Ohmori (Univ. of Toyama, Japan)


Session 4H   (Organized Workshop) Free and moving boundary problems 4
Time: 17:00 - 18:40 Wednesday, April 4, 2007
Location: MR 5, B1F
Chair: Marek Behr (RWTH Aachen Univ., Germany)

4H-1 (Time: 17:00 - 17:40)
Title[Keynote] NURBS-Enhanced FEM for the modeling of Euler and Maxwell's equations
Author*Antonio Huerta (Technical Univ. of Catalonia, Spain)

4H-2 (Time: 17:40 - 18:10)
TitleA Mass Conserving Moving Boundary Method for Runge-Kutta Discontinuous Galerkin Solutions to the Shallow Water Equations
Author*Shintaro Bunya, Joannes J. Westerink (Univ. of Notre Dame, United States), Ethan Kubatko, Clint Dawson (Univ. of Texas, Austin, United States), Shinobu Yoshimura (Univ. of Tokyo, Japan)

4H-3 (Time: 18:10 - 18:40)
TitleEulerian and Lagrangian Approaches for Shallow Water Flows Based on Stabilized Finite Element Method
Author*Kazuo Kashiyama, Shinsuke Takase, Nobuyoshi Kawai, Seizo Tanaka (Chuo Univ., Japan)


Session 1I   Meshfree/ Particle methods 3
Time: 10:30 - 12:10 Wednesday, April 4, 2007
Location: MR 6, B1F
Chairs: Anders Sand (Abo Akademi Univ., Finland), Olga Shipilova (Lappeenranta Univ. of Tech., Finland)

1I-1 (Time: 10:30 - 10:50)
TitleSPH for numerical study of metal jet by explosive shock compression
Author*Katsumi TANAKA (AIST, Japan)

1I-2 (Time: 10:50 - 11:10)
TitleModeling Rock Dynamic Failure by Using Smoothed Particle Hydrodynamics Method
AuthorGuowei Ma, *Xuejun Wang (Nanyang Technological Univ., Singapore)

1I-3 (Time: 11:10 - 11:30)
TitleElastic-plastic model of geomaterial in the framework of smoothed particle hydrodynamics (SPH) method
Author*Ha H. BUI, R. Fukagawa, K. Sako, S. Ohno (Ritsumeikan Univ., Japan)

1I-4 (Time: 11:30 - 11:50)
TitleAcceleration of Smoothed Particle Hydrodynamics using Graphics Hardware
Author*Takahiro Harada, Seiichi Koshizuka, Yoichiro Kawaguchi (Univ. of Tokyo, Japan)


Session 2I   Meshfree/ Particle methods 4
Time: 13:10 - 14:50 Wednesday, April 4, 2007
Location: MR 6, B1F
Chairs: Chieh-Sen Huang (National Sun Yat-sen Univ., Taiwan), Nobuyoshi KOMATSU (Kanazawa Univ., Japan)

2I-1 (Time: 13:10 - 13:30)
TitleThe Application of Modified Stokesian Dynamics to 3D Particle Motion Simulations of Pigment Coating Colours
Author*Anders Sand, Martti Toivakka (Abo Akademi Univ., Finland), Tuomo Hjelt (Oy Keskuslaboratorio-Centrallaboratorium Ab, Finland)

2I-2 (Time: 13:30 - 13:50)
TitleParticle transport method for the problem of gas bubble dissolution in a viscous flow
Author*Olga Shipilova, Heikki Haario, Zhanna Korotkaya (Lappeenranta Univ. of Tech., Finland), Anton Smolianski (Zurich Univ., Switzerland)

2I-3 (Time: 13:50 - 14:10)
TitleKeyframe Control of Fluid Simulation using Skeletal Particles
Author*Arisara Sumleeon, Pizzanu Kanongchaiyos (Chulalongkorn Univ., Thailand)

2I-4 (Time: 14:10 - 14:30)
TitleConservative MPS method in elastic analysis
Author*Masahiro Kondo, Seiichi Koshizuka (Tokyo Univ., Japan)

2I-5 (Time: 14:30 - 14:50)
TitleStabilized Meshless Particle Simulation of the Extrusion Problem
Author*Soheil Mohammadi, Ali Faraji, Karen Abrinia (Univ. of Tehran, Iran)


Session 3I   Meshfree/ Particle methods 5
Time: 15:10 - 16:30 Wednesday, April 4, 2007
Location: MR 6, B1F
Chairs: Katsumi TANAKA (AIST, Japan), WANG Chengbing (Tongji Univ., China)

3I-1 (Time: 15:10 - 15:30)
TitleError Estimate, Optimal Shape Factor, and High Precision Computation of Multiquadric Collocation Method
Author*Chieh-Sen Huang, C.F. Lee (National Sun Yat-sen Univ., Taiwan), Alex H.D. Cheng (Univ. of Mississippi, United States)

3I-2 (Time: 15:30 - 15:50)
TitleNumerical irreversibility in self-gravitating N-body systems
Author*Nobuyoshi KOMATSU, Yoichi UTANOHARA, Takahiro KIWATA, Shigeo KIMURA (Kanazawa Univ., Japan)

3I-3 (Time: 15:50 - 16:10)
TitleAn error controlled Fast Multipole Method
Author*Holger Dachsel (Research Centre Juelich, Germany)

3I-4 (Time: 16:10 - 16:30)
TitleThe boundary element-free method (BEFM) for two-dimensional elastoplasticity
Author*Yumin Cheng, Wu Zhang (Shanghai Univ.., China)



Thursday, April 5, 2007

Session 1Sa   Semi-Plenary Lecture by Professor T. Aoki
Time: 9:00 - 9:40 Thursday, April 5, 2007
Location: Cosmos 1, B2F
Chair: Takahiro Yamada (Yokohama National Univ., Japan)

1Sa-1 (Time: 9:00 - 9:40)
TitleConservative and non-conservative multi-moment schemes for computational fluid dynamics
Author*T. Aoki (Tokyo Inst. of Tech., Japan), Y. Imai (Tohoku Univ., Japan), K. Takizawa (National Maritime Research Institute, Japan)


Session 1Sb   Semi-Plenary Lecture by Dr. O. Marques
Time: 9:00 - 9:40 Thursday, April 5, 2007
Location: Cosmos 2, B2F
Chair: Hiroshi OKUDA (Univ. of Tokyo)

1Sb-1 (Time: 9:00 - 9:40)
TitleRewards of software reuse and an outlook on scientific software libraries
Author*Osni Marques (Lawrence Berkeley National Laboratory, United States)


Session 5A   (Organized Workshop) Meshfree/ Particle methods 5
Time: 10:00 - 11:40 Thursday, April 5, 2007
Location: Cosmos 1, B2F
Chairs: Marc Alexander Schweitzer (Univ. Bonn, Germany), Toshio Nagashima (Sophia Univ., Japan)

5A-1 (Time: 10:00 - 10:30)
Title[Keynote] An upper bound solution by the linearly conforming point interpolation method (LC-PIM)
Author*Guirong Liu, Guiyong Zhang (National Univ. of Singapore, Singapore)

5A-2 (Time: 10:30 - 11:00)
Title[Keynote] Particle Simulation and Its Application to Computer Graphics
Author*Seiichi Koshizuka (Univ. of Tokyo, Japan)

5A-3 (Time: 11:00 - 11:20)
TitleNumerical Simulation of Free Surface Problems on Naval and Ocean Engineering by using Moving Particle Semi-implicit Method
Author*Makoto Sueyoshi (Kyushu Univ., Japan)

5A-4 (Time: 11:20 - 11:40)
TitleImprovement of pressure precision in tank sloshing calculation by MPS method
Author*Yoshimasa Minami (National Maritime Research Institute, Japan)


Session 5B   (Organized Workshop) Structural Optimization 5
Time: 10:00 - 11:55 Thursday, April 5, 2007
Location: Cosmos 2, B2F
Chair: Makoto Ohsaki (Kyoto Univ.)

5B-1 (Time: 10:00 - 10:40)
Title[Keynote] Filter and stabilization methods in structural shape optimization
Author*Kai-Uwe Bletzinger, Matthias Firl, Johannse Linhard (Technical Univ. of Munich, Germany)

5B-2 (Time: 10:40 - 11:05)
TitleA Structural Optimization Method Based on the Level Set Method Using a New Type of Re-initialization Scheme
AuthorShintaro Yamasaki, *Shinji Nishiwaki, Kazuhiro Izui, Masataka Yoshimura (Kyoto Univ., Japan)

5B-3 (Time: 11:05 - 11:30)
TitleMultiphysics Topology Optimization of Dielectric Resonator Antennas
Author*Tsuyoshi Nomura, Kazuo Sato (Toyota Central R&D Laboratories, Inc., Japan), Shinji Nishiwaki, Masataka Yoshimura (Kyoto Univ., Japan)

5B-4 (Time: 11:30 - 11:55)
TitleA smoothing method for topology optimization problems of continua
Author*Hideyuki Azegami, Mai Nonogawa (Nagoya Univ., Japan), Kenzen Takeuchi (Quint Co., Japan), Ryu Sasaoka (Nagoya Univ., Japan)


Session 5C   (Organized Session) Computational methods of waves in inhomogeneous materials
Time: 10:00 - 11:40 Thursday, April 5, 2007
Location: Ran 1, B2F
Chair: Xu Han (Hunan Univ., China)

5C-1 (Time: 10:00 - 10:20)
TitleTransient waves in functionally graded plates with uncertain material properties
Author*X. Han , C. Jiang (Hunan Univ., China)

5C-2 (Time: 10:20 - 10:40)
TitleReal time transient analysis of a functionally gradient materials plate
Author*X. Han , Y.H. Huang (Hunan Univ., China), G.R. Liu (National Univ. of Singapore, Singapore)

5C-3 (Time: 10:40 - 11:00)
TitleWavelet method of band structure computation for sonic crystals
Author*Yue-Sheng Wang, Zhi-Zhong Yan (Beijing Jiaotong Univ., China), Ch. Zhang (Univ. of Siegen, Germany)

5C-4 (Time: 11:00 - 11:20)
TitleThe propagation and localization of Rayleigh waves in disordered piezoelectric phononic crystals
AuthorYi-Ze Wang, *Feng-Ming Li (Harbin Inst. of Tech., China), Yue-Sheng Wang (Beijing Jiaotong Univ., China)

5C-5 (Time: 11:20 - 11:40)
TitlePropagation characteristic of waves in three-dimensional fluid-filled porous structure: A finite element analysis
Author*Ying Liu (Beijing Jiaotong Univ., China)


Session 5D   Computational fluid dynamics 3
Time: 10:00 - 12:00 Thursday, April 5, 2007
Location: Ran 2, B2F
Chairs: Xiaoyong Wang (Natianal Univ. of Singapore, Singapore), Koji Asai (Yamaguchi Univ., Japan)

5D-1 (Time: 10:00 - 10:20)
TitleMach-uniform Pressure-correction Method for Solving Compressible Navier-Stokes Equations
Author*Hitoshi Yoshioka, Hidetoshi Nishida, Kenichi Matsuno (Kyoto Inst. of Tech., Japan)

5D-2 (Time: 10:20 - 10:40)
TitleDirect Numerical Simulation of Turbulent Flows by Conservative IDO Scheme
Author*Kenji Takizawa (National Maritime Research Institute, Japan), Takayuki Aoki (Tokyo Inst. of Tech., Japan)

5D-3 (Time: 10:40 - 11:00)
TitleA numerical study on the effects of viscosity ratio and high Reynolds numbers for two dimensional drops in Couette flow
AuthorSaeed Mortazavi, *Yaser Afshar (Isfahan Univ. of Tech., Iran)

5D-4 (Time: 11:00 - 11:20)
TitleA Numerical Simulation of Heat Transfer from a Circular Cylinder in Turbulent Flow
Author*Mohsen Saghafian (Isfahan Univ. of Tech., Iran)

5D-5 (Time: 11:20 - 11:40)
TitleNumerical Simulation of Two-phase Flow in Trickle Bed Reactors
Author*Arnab Atta, S Roy, K. D. P Nigam (Indian Inst. of Tech. Delhi, India)

5D-6 (Time: 11:40 - 12:00)
TitleA numerical approach to simulate two-phase flow in airlift pumps
AuthorMasoud Darbandi, Mohammad Hasan Saidi, *Pedram Hanafizadeh (Sharif Univ. of Tech., Iran)


Session 5E   Computational mechanics for solids and structures 7
Time: 10:00 - 12:00 Thursday, April 5, 2007
Location: MR 1, B1F
Chairs: Nimal Rajapakse (Univ. of British Columbia), Soheil Mohammadi (Univ. of Tehran)

5E-1 (Time: 10:00 - 10:20)
TitleFinite element modeling of polycrystalline ferroelectric materials by using a constrained domain switching model
Author*Nimal Rajapakse, Faxin Li (Univ. of British Columbia, Canada)

5E-2 (Time: 10:20 - 10:40)
TitleA Framework for the Semi-Automatic Development of Simulators for Multi-Physics Problems
Author*Felix C. G. Santos, Eduardo R. Brito Jr., José M. B. Silva (Univ. Federal de Pernambuco, Brazil)

5E-3 (Time: 10:40 - 11:00)
TitleFinite Element computation of the free surface of a liquid in micro-gravity
Author*Jean-Sebastien Schotte, Mahdi El-Kamali (ONERA, France), Roger Ohayon (CNAM, France)

5E-4 (Time: 11:00 - 11:20)
TitleNumerical modeling of flow induced vibration of suspension bar using a High-Order LES Model
Author*Debasish Biswas, Tomonao Takamatsu, Koichi Ohtomi (Toshiba Research and Development Center, Japan)

5E-5 (Time: 11:20 - 11:40)
TitleSimulation of Response of Smart Hydrogels to pH-Electric Coupled Stimuli
Author*Rongmo Luo (National Univ. of Singapore, Singapore), Hua Li, K.Y. Lam (Nanyang Technological Univ., Singapore)

5E-6 (Time: 11:40 - 12:00)
TitleModelling Complex Gas Flow-Fractured Solid Interaction by a Finite/Discrete Element Method
Author*Soheil Mohammadi (Univ. of Tehran, Iran)


Session 5F   (Organized Workshop) Innovative Computational Strategies 1
Time: 10:00 - 12:00 Thursday, April 5, 2007
Location: MR 2, B1F
Chair: Hiroshi Okuda (Univ. of Tokyo)

5F-1 (Time: 10:00 - 10:30)
TitleDevelopments in the Common Component Architecture
Author*Benjamin Allan (Sandia National Laboratories, United States)

5F-2 (Time: 10:30 - 11:00)
TitleA program development environment based on MATLAB
Author*Hideyuki Kawabata, Manami Amimoto, Toshiaki Kitamura (Hiroshima City Univ., Japan)

5F-3 (Time: 11:00 - 11:30)
TitlePython and XML for Numerical Modelling in Geosciences
Author*Lutz Gross, Laurent Bourgouin, Stephen Gordon, Alina Hale, Derick Howcraft, Hans-Bernd Muhlhaus, Ken Steube, Dion Weatherley (Univ. of Queensland, Australia)

5F-4 (Time: 11:30 - 12:00)
TitleNumerical Simulations in the SILC Matrix Computation Framework
Author*Tamito Kajiyama, Akira Nukada (CREST, JST / Univ. of Tokyo, Japan), Reiji Suda (Univ. of Tokyo / CREST, JST, Japan), Hidehiko Hasegawa (Univ. of Tsukuba, Japan), Akira Nishida (Chuo Univ. / CREST, JST, Japan)


Session 5G   (Organized Workshop) Fast multipole method 5
Time: 10:00 - 12:00 Thursday, April 5, 2007
Location: MR 4, B1F
Chairs: Guenther Of (Graz Univ. of Tech., Austria), Naoshi Nishimura (Kyoto Univ., Japan)

5G-1 (Time: 10:00 - 10:30)
TitleFast multipole boundary element methods in linear elastostatics
Author*Guenther Of, Olaf Steinbach (Graz Univ. of Tech., Austria), Wolfgang L. Wendland (Univ. of Stuttgart, Germany)

5G-2 (Time: 10:30 - 11:00)
TitleA fast time domain BIEM for elastodynamic crack problems in 3D
Author*Toru Takahashi, Hiroe Miyake, Kazuki Koketsu (Univ. of Tokyo, Japan)

5G-3 (Time: 11:00 - 11:30)
TitleTime-domain boundary element method derived by operational quadrature method and acceleration by fast multipole method in 2-D elastodynamics
Author*Takayuki ISHIDA, Takahiro SAITOH, Takuo FUKUI (Univ. of Fukui, Japan)

5G-4 (Time: 11:30 - 12:00)
TitleOption Pricing based on the Fast Multipole Methods
Author*Yusaku Yamamoto (Nagoya Univ., Japan)


Session 5H   (Organized Workshop) Free and moving boundary problems 5
Time: 10:00 - 11:50 Thursday, April 5, 2007
Location: MR 5, B1F
Chair: Sanjay Mittal (IIT Kanpur, India)

5H-1 (Time: 10:00 - 10:40)
Title[Keynote] The Intrinsic XFEM for Two-Fluid Flows
Author*Thomas-Peter Fries (RWTH Aachen Univ., Germany)

5H-2 (Time: 10:40 - 11:10)
TitleA practical CIP/multi-moment finite volume model for multi-fluid simulations
Author*Feng Xiao (Tokyo Inst. of Tech., Japan)

5H-3 (Time: 11:10 - 11:50)
Title[Keynote] Simulation of flexible and mechanical prosthetic heart valves
AuthorNeil Forsythe (Institut Francais du Petrole, France), *Jens-Dominik Mueller (Queen Mary, Univ. of London, Great Britain)


Session 5I   (Organized Workshop) Characterization of strength of materials and structures 1
Time: 10:00 - 11:50 Thursday, April 5, 2007
Location: MR 6, B1F
Chairs: Zhen Chen (Univ. of Missouri-Columbia, United States), Kenji Oguni (Univ. of Tokyo, Japan)

5I-1 (Time: 10:00 - 10:40)
Title[Keynote] Extended Element Free Galerkin Method without Partial Enrichment
Author*Goangseup Zi (Korea Univ., Republic of Korea), Timon Rabczuk (Univ. of Canterbury, New Zealand), Stephane Bordas (Univ. of Glasgow, Great Britain)

5I-2 (Time: 10:40 - 11:10)
TitleParticle discretization for modeling brittle failure of 3D bodies
Author*Maddegedara Lalith Lakshman Wijerathne, Hide Sakaguchi (Japan Agency for Marine-Earth Science and Technology, Japan), Kenji Oguni, Muneo Hori (Earhquake Research Institute, Japan)

5I-3 (Time: 11:10 - 11:50)
Title[Keynote] A thermo-mechanical coupled multi-scale Approach for Hardened Cement Paste
Author*Michael Hain, Peter Wriggers (Univ. of Hannover, Germany)


Session 2P   Plenary Lecture by Mr. S. Ando
Time: 13:00 - 13:50 Thursday, April 5, 2007
Location: Himawari, B2F
Chair: Mitsuru Kitamura (Hiroshima Univ., Japan)

2P-1
TitleApplications of computational method for automobile development -Introduction of the up-to-date technologies-
Author*Seiichi Ando (Mazda Motor Co., Japan)



Friday, April 6, 2007

Session 2Sa   Semi-Plenary Lecture by Professor Y.Y. Kim
Time: 9:00 - 9:40 Friday, April 6, 2007
Location: Cosmos 1, B2F
Chair: Makoto Ohsaki (Kyoto Univ.)

2Sa-1 (Time: 9:00 - 9:40)
TitleOptimization Issues in Magneto-Mechanical Sensor Design for Ultrasonic Wave Transduction and Vibration Measurement
Author*Yoon Young Kim (Seoul National Univ., Republic of Korea)


Session 2Sb   Semi-Plenary Lecture by Professor A. Huerta
Time: 9:00 - 9:40 Friday, April 6, 2007
Location: Cosmos 2, B2F
Chair: Kazuo Kashiyama (Chuo Univ.)

2Sb-1 (Time: 9:00 - 9:40)
TitleFlux-free error estimators and adaptivity for finite elements and mesh-free methods
Author*Antonio Huerta, Pedro Diez, Nuria Pares, Yolanda Vidal (Technical Univ. of Catalonia, Spain)


Session 6A   (Organized Workshop) Meshfree/ Particle methods 6
Time: 10:00 - 11:40 Friday, April 6, 2007
Location: Cosmos 1, B2F
Chair: Carlos Tiago (Universidade Técnica de Lisboa, Portugal)

6A-1 (Time: 10:00 - 10:30)
Title[Keynote] An hp-adaptive multilevel particle-partition of unity method
AuthorMichael Griebel, *Marc Alexander Schweitzer (Univ. Bonn, Germany)

6A-2 (Time: 10:30 - 10:50)
TitleCrack propagation analysis in residual stress field by X-FEM
Author*Toshio Nagashima (Sophia Univ., Japan), Naoki Miura (Central Research Institute of Electric Power Industry, Japan)

6A-3 (Time: 10:50 - 11:10)
TitleAn Adaptive B-spline Wavelet Galerkin Method for the Analyses of Elastostatics
AuthorSatoyuki Tanaka, *Hiroshi Okada (Kagoshima Univ., Japan)


Session 7A   Meshfree/ Particle methods 1
Time: 13:00 - 14:40 Friday, April 6, 2007
Location: Cosmos 1, B2F
Chairs: Guangming Zhao (Anhui Univ. of Science and Tech., China), Cheng Xiang Song (National Univ. of Singapore, Singapore)

7A-1 (Time: 13:00 - 13:20)
TitleMeshfree Shape Optimization of Piezoelectric Devices
AuthorChengwen Liu, *Ertugrul Taciroglu (Univ. of California, Los Angeles, United States)

7A-2 (Time: 13:20 - 13:40)
TitleA gradient smoothing method (GSM) for adaptive stress analysis in solids
Author*Jian ZHANG, Gui-Rong Liu (National Univ. of Singapore, Singapore), Khin Yong Lam, Hua Li (Nanyang Technological Univ., Singapore)

7A-3 (Time: 13:40 - 14:00)
TitleElasto-Plastic Element Free Galerkin Method by Using Penalty Function
Author*Afshin Kiasat (Isfahan Univ. of Tech., Iran), Hamid Ekhteraei Toussi (Ferdowsi Univ., Iran), Mehran Moradi, Hamid Hashemolhosseini (Isfahan Univ. of Tech., Iran)

7A-4 (Time: 14:00 - 14:20)
TitleApplication of the nodal integration FEM to elastic-plastic problems and its evaluation
Author*Mao Kurumatani, Takashi Kojima, Kenjiro Terada (Tohoku Univ., Japan)

7A-5 (Time: 14:20 - 14:40)
TitleA Truly Meshless Method for the Solution of Convection Dominated Problems
Author*Hamed Arzani (Shahid Rajaee Univ., Iran), Mohammad Hadi Afshar (Iran Univ. of Science & Technology, Iran)


Session 8A   Meshfree/ Particle methods 2
Time: 15:00 - 16:40 Friday, April 6, 2007
Location: Cosmos 1, B2F
Chairs: Ertugrul Taciroglu (Univ. of California, Los Angeles, United States), ZHANG Jian (National Univ. of Singapore, Singapore)

8A-1 (Time: 15:00 - 15:20)
TitleA meshfree smoothed least-squares (SLS) method for solving first order partial differential equations
Author*Cheng Xiang Song, Gui-Rong Liu (National Univ. of Singapore, Singapore), Hua Li (Nanyang Technological Univ., Singapore)

8A-2 (Time: 15:20 - 15:40)
TitleThe Meshless Method for Numerical Analysis of Impact Process of Metal Material
Author*Guangming Zhao (Anhui Univ., China), Shuncheng Song (Southwest Jiaotong Univ., China)

8A-3 (Time: 15:40 - 16:00)
TitleModification of moving least square approximation by imposing essential boundary condition using Kriging method
AuthorSaied Housain Dibajian, Mahmoud Farzin, Saied Hamid Hashem Alhousainy, *Nader Fathianpour (Isfahan Univ. of Tech., Iran)

8A-4 (Time: 16:00 - 16:20)
TitleModification of weight function in moving least square approximation and its application in meshless local Petrov-Galerkin method
Author*Nader Fathianpour, Saied Hamid Hashem Alhousainy, Mahmoud Farzin , Saied Housain Dibajian (Isfahan Univ. of Tech., Iran)

8A-5 (Time: 16:20 - 16:40)
TitleInvestigation on the influence of the parameters affecting the accuracy of MLS approximation
AuthorAfshin Kiasat, *Mehran Moradi, Hamid Hashemolhosseini (Isfahan Univ. of Tech., Iran)


Session 6B   Optimization 1
Time: 10:00 - 11:40 Friday, April 6, 2007
Location: Cosmos 2, B2F
Chairs: Koetsu Yamazaki (Kanazawa Univ., Japan), Tomoyuki Hiroyasu (Doshisha Univ., Japan)

6B-1 (Time: 10:00 - 10:20)
TitleHybrid Meta-Heuristics Toolbox for Global Optimization
Author*Abdel-Rahman Hedar, Masao Fukushima (Kyoto Univ., Japan)

6B-2 (Time: 10:20 - 10:40)
TitleA Hybrid Algorithm for Structural Topology Optimization
Author*Cuimin Li, Tomoyuki Hiroyasu, Mitsunori Miki (Doshisha Univ., Japan)

6B-3 (Time: 10:40 - 11:00)
TitleForm Finding of Minimal Surface with Constraint Conditions
Author*Wan-Ling KE, Ken'ichi KAWAGUCHI (Univ. of Tokyo, Japan)

6B-4 (Time: 11:00 - 11:20)
TitleHigh-speed optimization of tension leveling conditions
Author*Masaaki Shigaki, Ryutaro Hino, Hiroshi Hamasaki (Hiroshima Univ., Japan), Vassili Toropov (Univ. of Leeds, Great Britain), Fusahito Yoshida (Hiroshima Univ., Japan)

6B-5 (Time: 11:20 - 11:40)
TitleStructural Optimization of Three Axes Tactile Sensor by using DOE
Author*Hiroko Oshima, Nobutaka Tsujiuchi, Takayuki Koizumi, Akihito Ito (Doshisha Univ., Japan), Yotaro Tsuchiya (K-tec system, Japan), Yoshiro Nojiri (Institute of Sensor Device Development, Japan)


Session 7B   Optimization 2
Time: 13:00 - 14:40 Friday, April 6, 2007
Location: Cosmos 2, B2F
Chairs: Katsuyuki Suzuki (Univ. of Tokyo, Japan), Hiroko Oshima (Doshisha Univ., Japan)

7B-1 (Time: 13:00 - 13:20)
TitleShape optimization of ship structure by multiple point constraint and individual mesh sub-division techniques
AuthorMitsuru Kitamura, Kunihiro Hamada, *Takahiro Takaki (Hiroshima Univ., Japan), Kunpei Kanaya (Onomichi Dockyard Co., Ltd, Japan)

7B-2 (Time: 13:20 - 13:40)
TitleDevelopment of optimal structure design system for mid-ship section
AuthorMitsuru Kitamura, Kunihiro Hamada, *Hiroki Suzuki (Hiroshima Univ., Japan), Kanae Yano (Mazda Engineering & Technology Co., Ltd, Japan)

7B-3 (Time: 13:40 - 14:00)
TitleCompliance of Effective Region adjacent to a Bolted Joint
Author*Shiro Yoshida (Shonan R&D, Inc., Japan)

7B-4 (Time: 14:00 - 14:20)
TitleOptimization of Sled Test Pin Profile Using Neural networks with Occupant Simulation Model
Author*De-Shin Liu, Chih-Ming Fan, W. K. Tsay, S. Y. Chang (National Chung Cheng Univ., Taiwan), Shu-Lin Hsu (Automotive Research & Testing Center, Taiwan)

7B-5 (Time: 14:20 - 14:40)
TitleFuzzy decision-making technique for relative evaluation of aesthetic of pre-stressed concrete bridge system
Author*Sampath Bandara Narasinghe, P.B.R. Dissanayake (Univ. of Peradeniya, Sri Lanka)


Session 8B   Optimization 3
Time: 15:00 - 16:00 Friday, April 6, 2007
Location: Cosmos 2, B2F
Chairs: Katsuyuki Suzuki (Univ. of Tokyo, Japan), Makoto Tsukino (Quint Co., Japan)

8B-1 (Time: 15:00 - 15:20)
TitleA Numerical Study for the Improvement of the Black Spot Generated in Electroless Ni Plating Process
Author*Dal Hyun Yoo, Yong Seok Kim, Hee Soo Kim (Samsung Electro-Mechanics Co., Ltd., Republic of Korea)

8B-2 (Time: 15:20 - 15:40)
TitleRandom Fatigue Analysis of New Vehicular Electron Cabinet Based on FEA
Author* Haiming HUANG, Xiaoliang XU , Rongqian WANG (Beijing Jiaotong Univ., China)

8B-3 (Time: 15:40 - 16:00)
TitleThree Dimensional Shape Identification of a Body Located in Incompressible Viscous Fluid Flow
Author*Kazuya Nojima, Mutsuto Kawahara (Chuo Univ., Japan)


Session 6C   Computational mathematics 1
Time: 10:00 - 12:00 Friday, April 6, 2007
Location: Ran 1, B2F
Chairs: Bob Mattheij (Tech. Univ. Eindhoven, Netherlands), Michio Sakakihara (Okayama Univ. of Science, Japan)

6C-1 (Time: 10:00 - 10:20)
TitleA New Continuation Method for Nonlinear Boundary Value Problems
Author*Abdul Aziz (Gonzaga Univ., United States)

6C-2 (Time: 10:20 - 10:40)
TitleKrylov Subspace Iterations for Solving Transport Equations
Author*Shulin Yang, Weidong Shen (Institute of Applied Physics and Computational Mathematics, China)

6C-3 (Time: 10:40 - 11:00)
TitleWeak order implicit stochastic Runge-Kutta methods for commutative stochastic differential equations
Author*Yoshio Komori (Kyushu Inst. of Tech., Japan)

6C-4 (Time: 11:00 - 11:20)
TitleJet Structure-Preserving Methods for Euler-Lagrange System
Author*Shuanghu Wang (Institute of Applied Physics and Computational Mathematics, China)

6C-5 (Time: 11:20 - 11:40)
TitleOptimal parametrization of delay differential - algebraic equations
Author*Evgenii Kuznetsov (Moscow Aviation Institute (State Technical Univ.), Russian Federation)

6C-6 (Time: 11:40 - 12:00)
TitleInterpolation, interlineation, interflation of the functions of the many variables is the future of the computational methods
Author*Oleg Mykolayovich Lytvyn (Ukrainian Engineering and Pedagogical Academy, Ukraine)


Session 7C   Computational mathematics 2
Time: 13:00 - 14:40 Friday, April 6, 2007
Location: Ran 1, B2F
Chairs: Yoshio Komori (Kyushu Inst. of Tech., Japan), Yang Shulin (Institute of Applied Physics and Computational Mathematics, China)

7C-1 (Time: 13:00 - 13:20)
TitleAcceleration methods for some linear and nonlinear iterations
Author*Michio Sakakihara, Masahiro Kuroda (Okayama Univ. of Science, Japan)

7C-2 (Time: 13:20 - 13:40)
TitleUniform Decompositions of Polytopes
AuthorDaniel Berend, *Luba Bromberg (Ben-Gurion Univ. of the Negev, Israel)

7C-3 (Time: 13:40 - 14:00)
TitleNumerical volume preservation of divergence free fluid under symmetry
Author*Robert M Mattheij (Tech. Univ. Eindhoven, Netherlands)

7C-4 (Time: 14:00 - 14:20)
TitleA CP-net based model for Web Services Composition
Author*Hui Kang, Xiuli Yang, Jie Pu, Xuesong Wang, Feng Zhang (Jilin Univ., China)

7C-5 (Time: 14:20 - 14:40)
TitleTranslating WSDL to Pi Calculus based Model for Web Services
Author*Hui Kang, Jie Pu, Xiuli Yang (Jilin Univ., China)


Session 8C   Computational mathematics 3 & Computational biology
Time: 15:00 - 17:20 Friday, April 6, 2007
Location: Ran 1, B2F
Chairs: Yu Zhang (Institute of High Performance Computing, Singapore), Yanheng Liu (Jilin Univ., China)

8C-1 (Time: 15:00 - 15:20)
TitleThe S and D transformations for developing algorithms for two-center overlap-like quantum similarity integrals
Author*H Safouhi, A Bouferguene (Univ. of Alberta, Canada)

8C-2 (Time: 15:20 - 15:40)
TitleTHE RESEARCH ON LIFECYCLE BASED WORKFLOW CONSTRAINT MODEL
Author*ZHAO-HUI ZHANG, YI-SHAN ZHANG (Jilin Univ., China)

8C-3 (Time: 15:40 - 16:00)
TitleMicroarray biclustering: mathematical model and metaheuristic alternatives
Author*Dimitri Perrin (School of Computing, Dublin City Univ., Ireland), Christophe Duhamel (Institut Superieur d'Informatique de Modelisation et leurs Applications, France), Heather J. Ruskin, Martin Crane (School of Computing, Dublin City Univ., Ireland)

8C-4 (Time: 16:00 - 16:20)
TitleAn Ant Colony Algorithm with Global Adaptive Optimization
AuthorJian Wang, *Yanheng Liu, Daxin Tian (Jilin Univ., China)

8C-5 (Time: 16:20 - 16:40)
TitleDetection Rate of Decision Tree for Intrusion Detection with Reduced KDDCUP99 Feature Sets
Author*Behrouz Minaei, Hadi Shahriar Shahhoseini, Morteza Analoui, Mohammad Hosein Rezvani (Iran Univ. of Science & Technology, Iran)

8C-6 (Time: 16:40 - 17:00)
TitleConformation-based Parameterization of Range Scan Data for Face Modeling
Author*Yu Zhang, Shuhong Xu, Yi Su, Chietsing Chong, Terence Hung (Institute of High Performance Computing, Singapore)

8C-7 (Time: 17:00 - 17:20)
TitleConstructing models from medical imaging data using subdivision surfaces
AuthorShuhong Xu, *Yu Zhang (Institute of High Performance Computing, Singapore), Ihar Volkau (Singapore Bio-imaging Consortium, Singapore)


Session 6D   Computational fluid dynamics 4
Time: 10:00 - 12:00 Friday, April 6, 2007
Location: Ran 2, B2F
Chairs: Kenichi Matsuno (Kyoto Inst. of Tech., Japan), Jun Mao (Beijing Jiaotong Univ., China)

6D-1 (Time: 10:00 - 10:20)
TitleCoarsening 3-D Hybrid Meshes for Multigrid Methods for Viscous Flows
Author*Jens-Dominik Mueller (Univ. of London, Great Britain), N Forsythe (Institute France de Petrole, France)

6D-2 (Time: 10:20 - 10:40)
TitleReassessment of a finite volume element method on moving boundaries with deformable meshes
AuthorAlireza Naderi, *Masoud Darbandi, Mohamad Taeibi-Rahni (Sharif Univ. of Tech., Iran)

6D-3 (Time: 10:40 - 11:00)
TitleFlow through Earth Dam with Heterogeneous Soil Profile: A Moving Mesh Finite Volume Approach
Author*Masoud Darbandi, Yasaman Daghighi, Dorrin Jarrahbashi (Sharif Univ. of Tech., Iran)

6D-4 (Time: 11:00 - 11:20)
TitleAutomatic mesh generation for the hexahedral finite elements specially intended to wind simulation of urban environments
Author*Takashi Nomura, Daisuke Ono, Hiroshi Hasebe (Nihon Univ., Japan)

6D-5 (Time: 11:20 - 11:40)
TitleRealization of the analytical wall function in the finite element analysis
Author*HIroshi Hasebe, Takashi Nomura (Nihon Univ., Japan)

6D-6 (Time: 11:40 - 12:00)
TitleWind Flow Analysis considered body corners in Isothermal Condition based on k-e Model
Author*Masayoshi Kishi, Seizo Tanaka, Kazuo Kashiyama (Chuo Univ., Japan)


Session 7D   Computational fluid dynamics 5
Time: 13:00 - 14:40 Friday, April 6, 2007
Location: Ran 2, B2F
Chairs: Jens-Dominik Mueller (Univ. of London, Great Britain), Shintaro Bunya (Univ. of Norte Dame, United States)

7D-1 (Time: 13:00 - 13:20)
TitleMonolithic Space-Time Finite Element Solution of Flow-Structure Interactions with Application to Aero- and Hydroelasticity
Author*Andreas Koelke, Dieter Dinkler (Institute for Structural Analysis, Germany)

7D-2 (Time: 13:20 - 13:40)
TitleNumerical Simulation of Three Dimensional Flows over an Elastic Circular Cylinder Considering Fluid-Structure Interaction
Author*Yoshihiro TANAKA, Koji MORINISHI, Kenichi MATSUNO (Kyoto Inst. of Tech., Japan)

7D-3 (Time: 13:40 - 14:00)
TitleUnstructured Moving-Grid Finite-Volume Method with Appearance/Disappearance of Elements for Three-Dimensional Compressible Flow
Author*Masashi Yamakawa, Kenichi Matsuno (Kyoto Inst. of Tech., Japan)

7D-4 (Time: 14:00 - 14:20)
TitleALE finite element method for complicated free surface flows using background mesh
Author*Seizo Tanaka, Kazuo Kashiyama (Chuo Univ., Japan)

7D-5 (Time: 14:20 - 14:40)
TitleShallow Water Flow Analysis based on Lagrangian Approach using Space-Time Stabilized Finite Element Method
Author*Shinsuke Takase (Research Center of Computational Mechanics, Inc., Japan), Seizo Tanaka, Kazuo Kashiyama (Chuo Univ., Japan)


Session 8D   Computational fluid dynamics 6
Time: 15:00 - 17:20 Friday, April 6, 2007
Location: Ran 2, B2F
Chairs: Takashi Nomura (Nihon Univ., Japan), Andreas Koelke (Institute for Structural Analysis, Germany)

8D-1 (Time: 15:00 - 15:20)
TitleA hybrid general finite difference scheme to compute complex 3D moving boundary problems
Author*Xiaoyong Wang, Khoon Seng Yeo , Boo Cheong Khoo (National Univ. of Singapore, Singapore)

8D-2 (Time: 15:20 - 15:40)
TitleAnalysis of Lattice Boltzmann method on non-uniform grids
Author*Irwan Ary Dharmawan (Univ. Padjadjaran, Indonesia), Michael Junk (Univ. Konstanz, Germany)

8D-3 (Time: 15:40 - 16:00)
TitleNumerical method for liquefaction based on fluid-particle coupled analysis
Author*Shuji Moriguchi, Takayuki Aoki (Tokyo Inst. of Tech., Japan)

8D-4 (Time: 16:00 - 16:20)
TitleDevelopment of high-order and high-resolution 6-point scheme for advection transport
Author*Koji Asai (Yamaguchi Univ., Japan), Koichi Tsubogo (Eight Consultants Co., Japan), Toshimitsu Komatsu (Kyushu Univ., Japan)

8D-5 (Time: 16:20 - 16:40)
TitleFree Surface Flow Analysis around a Permeable Structure by CIVA/VOF Method
Author*Noriyuki Yotsuya, Seizo Tanaka, Kazuo Kashiyama (Chuo Univ., Japan)

8D-6 (Time: 16:40 - 17:00)
TitleDevelopment of A Stabilized Finite Element Method for Shallow Water Flow Analysis
Author*Nobuyoshi Kawai, Seizo Tanaka, Kazuo Kashiyama (Chuo Univ., Japan)

8D-7 (Time: 17:00 - 17:20)
TitleExperimental and numerical approach to improve the performance of a primary settling tank
Author*Amir Razmi, Bahar Firoozabadi (Sharif Univ. of Tech., Iran)


Session 6E   Computational mechanics for solids and structures 8
Time: 10:00 - 12:00 Friday, April 6, 2007
Location: MR 1, B1F
Chairs: Ryutaro Hino (Hiroshima Univ.), Antolin Lorenzana Iban (Universidad de Valladolid)

6E-1 (Time: 10:00 - 10:20)
TitleTheoretical Analysis of the Bond Performance in FRP- Concrete Interface
Author*Enquan Fang (Tongji Univ., China), Leishun Zhang (Zhengzhou Univ., China)

6E-2 (Time: 10:20 - 10:40)
TitleSpringback simulation for V-bending of clad sheet metals
AuthorRyutaro Hino, *K. Yilamu, Fusahito Yoshida (Hiroshima Univ., Japan)

6E-3 (Time: 10:40 - 11:00)
TitleDuctile simulation of Punchless piercing Process using Gurson and Lemaitre coupled Damage models
Author*Mehran Moradi, Mahmoud Farzin, Hamid Reza Javani (Isfahan Univ. of Tech., Iran)

6E-4 (Time: 11:00 - 11:20)
TitleThe Study on Numerical Method to the spoiling and damage evolution process of concrete
Author*Jinduo Ye (Tianjin Univ. of Tech., China), Hang Ye (Zanussi Elettromeccanica Tianjin Compressor Co., Ltd., China), Chunqiu Zhang (Tianjin Univ. of Tech., China)

6E-5 (Time: 11:20 - 11:40)
TitleModel of damage by relative plastic rotation and its influence in the collapse load of frames
Author*Antolín L. Ibán (Univ. of Valladolid, Spain), Edwin L. Chica (CARTIF, Spain), José M. G. Terán (Univ. of Valladolid, Spain)

6E-6 (Time: 11:40 - 12:00)
TitleA hyperelastic-viscoplastic-damage model for rubber-like solids
Author*Junji YOSHIDA, Toshiyuki SUGIYAMA (Univ. of Yamanashi, Japan)


Session 7E   Computational mechanics for solids and structures 9
Time: 13:00 - 14:40 Friday, April 6, 2007
Location: MR 1, B1F
Chairs: Junji Yoshida (Yamanashi Univ.), Zhengdao Wang (Beijing JiaoTong Univ.)

7E-1 (Time: 13:00 - 13:20)
TitleLattice Model Applied in Simulating Fracture of Large Deformation
AuthorPeng Hou, *Yuesheng Wang (Beijing Jiaotong Univ., China)

7E-2 (Time: 13:20 - 13:40)
TitleApplication of VMIB model to the analysis of fibre reinforcement effect in composite
Author*Zhennan Zhang (Shanghai Univ.., China), Xiurun Ge (Shanghai Jiaotong Univ., China)

7E-3 (Time: 13:40 - 14:00)
TitleA coupling of scaled boundary finite element-finite element method for fracture analysis
Author*Santosh Shrestha, Mitao Ohga (Ehime Univ., Japan)

7E-4 (Time: 14:00 - 14:20)
TitleNumerical analysis of the deformation and fracture process of polymeric films
Author*Zhengdao Wang (Beijing Jiaotong Univ., China)

7E-5 (Time: 14:20 - 14:40)
TitleApplication Fields of a Multi-Material Eulerian Finite Element Method
Author*Rafael Doig, Patrick Kaeding (ThyssenKrupp Marine Systems, Surface Vessel Division, Germany), Shigenobu Okazawa (Hiroshima Univ., Japan)


Session 8E   Computational mechanics for solids and structures 10
Time: 15:00 - 16:40 Friday, April 6, 2007
Location: MR 1, B1F
Chairs: Shuhong Wang (Northeastern Univ.), Fei Yang (Tongji Univ.)

8E-1 (Time: 15:00 - 15:20)
TitleNumerical Modeling of Effect of Intermittent Joint on Circular Roadway Stability
Author*Zhe Zhang (Northeastern Univ., Shenyang, China), Chun'an Tang (Dalian Univ. of Tech., China), Tianhui Ma (Northeastern Univ., Shenyang, China), Tao Xu (Dalian Univ. of Tech., China)

8E-2 (Time: 15:20 - 15:40)
TitleApplications of the newly key block modeling technique at stability analysis of rock tunnel
Author*Shuhong Wang, Yabing Zhang, Wenhua Liu, Fei Li (Northeastern Univ., China)

8E-3 (Time: 15:40 - 16:00)
TitleThe application of consolidation theory on the design of permeable lining in high pressure hydraulic tunnel
Author*Xin-xing LI, He-hua ZHU, Yong-chang CAI (Tongji Univ., China)

8E-4 (Time: 16:00 - 16:20)
TitleOn the total Lagrangian finite-element formulation of geometrically-nonlinear consolidation problems
Author*Zhou-xiang DING, He-hua ZHU (Tongji Univ., China)

8E-5 (Time: 16:20 - 16:40)
TitleSettlement prediction of embankments on soft clays based on rheological theory
Author*Fei Yang (Tongji Univ., China), Linchang Miao (Southeast Univ., China), Lijun Sun (Tongji Univ., China)


Session 6F   (Organized Workshop) Innovative Computational Strategies 2
Time: 10:00 - 12:00 Friday, April 6, 2007
Location: MR 2, B1F
Chair: Lutz Gross (ESSCC, Univ. of Queensland)

6F-1 (Time: 10:00 - 10:30)
TitleProblem Solving Environment for Digital Engineering
Author*Kunihiro Matsuzawa, Hideaki Koike (Univ. of Tokyo, Japan), Hiroshi Ohsuga, Fumito Ohya (AdvanceSoft Co., Japan), Toshio Hatada (Univ. of Tokyo, Japan)

6F-2 (Time: 10:30 - 11:00)
TitleBuilding hybrid parallel PDE software by domain decomposition and object-oriented programming
Author*Xing Cai (Simula Research Laboratory, Norway)

6F-3 (Time: 11:00 - 11:30)
TitleMiddleware for Developing Parallel Finite Element Applications
Author*Hiroshi Okuda (Univ. of Tokyo, Japan)

6F-4 (Time: 11:30 - 12:00)
TitleHigh-Performance Tools for The Development of Scalable Applications
Author*Leroy Anthony Drummond (Lawrence Berkeley National Laboratory, United States)


Session 7F   (Organized Workshop) Innovative Computational Strategies 3
Time: 13:00 - 14:40 Friday, April 6, 2007
Location: MR 2, B1F
Chair: Kengo Nakajima (Univ. of Tokyo)

7F-1 (Time: 13:00 - 13:40)
TitleParallel Computing techniques for the multiphysics heart simulator
Author*Takumi Washio, Junichi Okada (JST / Univ. of Tokyo, Japan), Toshiaki Hisada (Univ. of Tokyo, Japan)

7F-2 (Time: 13:40 - 14:10)
TitleComparison of the effect between solver and preconditioning for linear equations which is based on systematical data analysis
Author*Shoji Itoh (Univ. of Tsukuba, Japan)

7F-3 (Time: 14:10 - 14:40)
TitleImplementation of a flexible, robust, and efficient Grid-enabled QM/CL simulation
Author*Yoshio Tanaka (AIST, Japan)


Session 8F   (Organized Workshop) Innovative Computational Strategies 4
Time: 15:00 - 17:00 Friday, April 6, 2007
Location: MR 2, B1F
Chair: Xing Cai (Simula Research Laboratory, Norway)

8F-1 (Time: 15:00 - 15:30)
TitleMedical and Life Science IT environments based on Grid Services
Author*Jochen Fingberg (C&C Research Laboratories, NEC Europe Ltd., Germany)

8F-2 (Time: 15:30 - 16:00)
TitleA Real-time visualization system for numerical simulation that divides regions
Author*Osamu Ohta, Hiroshi Oiwa, Teruo Matsuzawa (JAIST, Japan)

8F-3 (Time: 16:00 - 16:30)
TitleGfarm Grid File System
Author*Osamu Tatebe (Univ. of Tsukuba, Japan)

8F-4 (Time: 16:30 - 17:00)
TitleConforming parallel adaptive mesh refinement for hexahedral meshes in geophysics applications
Author*Kengo Nakajima (Univ. of Tokyo, Japan)


Session 6G   Boundary element methods
Time: 10:00 - 12:00 Friday, April 6, 2007
Location: MR 4, B1F
Chair: Kazuyuki Nakahata (Ehime university, Japan)

6G-1 (Time: 10:00 - 10:20)
TitleFast 3D Poisson equation solvers based on fast Fourier transform on multipoles (FFTM) algorithm
Author*Kian-Meng Lim, Xuefei He, Siak Piang Lim (National Univ. of Singapore, Singapore)

6G-2 (Time: 10:20 - 10:40)
TitleError analysis and preconditioning for Taylor Expansions Multipole-BEM
Author*Zejun Chen, Hong Xiao (Yanshan Univ., China)

6G-3 (Time: 10:40 - 11:00)
TitleSimulation of scattered wave from rough surface crack using fast multipole BEM
Author*Kazuyuki Nakahata (Ehime Univ., Japan), Sohichi Hirose (Tokyo Inst. of Tech., Japan), Takahiro Saito, Takuo Fukui (Fukui Univ., Japan)

6G-4 (Time: 11:00 - 11:20)
TitleNull-field equation approach as a tool for computing Green's function for Laplace operator with circular holes and/or inclusions
Author*Jeng-Tzong Chen , Jia-Nan Ke, Huan-Zhen Liao (National Taiwan Ocean Univ., Taiwan)

6G-5 (Time: 11:20 - 11:40)
TitleNumerical solution of elliptic boundary-value problems with small disturbances of boundary
Author*Mykola V. Polyakov, Tetyana I. Tarasova, Dmytro V. Yevdokymov (Dniepropetrovsk National Univ., Ukraine)

6G-6 (Time: 11:40 - 12:00)
TitleUsing of small parameter expansion in boundary element algorithm
Author*Dmytro Yevdokymov (Dniepropetrovsk National Univ., Ukraine)


Session 7G   Advanced finite element/ difference/ volume methods 1
Time: 13:00 - 14:40 Friday, April 6, 2007
Location: MR 4, B1F
Chairs: Seyoung Im (Korea Advanced Inst. of Science and Tech., Republic of Korea), Gakuji Nagai (Gifu Univ., Japan)

7G-1 (Time: 13:00 - 13:20)
TitleA Fitting Finite Volume Method for the Valuation of Options on Assets with Stochastic Volatilities and its Convergence Analysis
AuthorChien Sen Huang, *Chen Hui Hung (National Sun Yat-sen Univ., Taiwan), Song Wang (Univ. of Western Australia, Australia)

7G-2 (Time: 13:20 - 13:40)
TitleAdaptive Local Refinement using T-spline in Finite Element Method
AuthorKi-seung Kim, *Yu-Deok Seo, Sung-Kie Youn (Korea Advanced Inst. of Science and Tech., Republic of Korea)

7G-3 (Time: 13:40 - 14:00)
TitleDiscrete Helmholtz-decomposition for computational continuum mechanics
Author*Junya IMAMURA (IMI Computational Engineering Laboratory, Japan), Takahiko TANAHASHI (Emeritus Professor of Keio Univ., Japan)

7G-4 (Time: 14:00 - 14:20)
TitleGeneralized transitional finite elements and their applications to nonmatching mesh related problems
Author*Jae Hyuk Lim, Seyoung Im (Korea Advanced Inst. of Science and Tech. (KAIST), Republic of Korea)

7G-5 (Time: 14:20 - 14:40)
Title3-D Finite element procedure minimizing a functional for piezoelectric problem
Author*Gakuji NAGAI, Kimihiro UMEMURA, Takamasa HAYASHI (Gifu Univ., Japan)


Session 8G   Advanced finite element/ difference/ volume methods 2
Time: 15:00 - 17:00 Friday, April 6, 2007
Location: MR 4, B1F
Chair: Gakuji Nagai (Gifu Univ., Japan)

8G-1 (Time: 15:00 - 15:20)
TitleEstablishing and applying of 3-D elastic visco-plastic constitutive model
Author*Yanbin Fu, Hehua Zhu (Tongji Univ., China)

8G-2 (Time: 15:20 - 15:40)
TitleA FEM using scaled gradient of strains with scaling factor alpha (alpha-FEM)
Author*Thoi Trung Nguyen, Gui Rong Liu (National Univ. of Singapore, Singapore), Khin Yong Lam (Nanyang Technological Univ., Singapore)

8G-3 (Time: 15:40 - 16:00)
Title2-D Infinite Element Modeling Strategy for Elasto-static Analysis of Unbounded Domain
Author*De-Shin Liu, Kuo-Liang Cheng (National Chung Cheng Univ., Taiwan), De-Yi Chiou (Industrial Technology Research Institute, Taiwan)

8G-4 (Time: 16:00 - 16:20)
TitleNumerical modeling of failure process of rock underground tunneling considering the effect of support
Author*Dengpan Qiao (Kunming Univ. of Science and Tech., China), Shuhong Wang (Northeastern Univ., China)

8G-5 (Time: 16:20 - 16:40)
TitleNumerical simulation on fracture formation on surfaces of bi-layered spherical solid
Author*Tianhui Ma (Dalian Univ., China), Chun'an Tang, Zhengzhao Liang (Dalian Univ. of Tech., China), Yongbin Zhang, Zhe Zhang (Northeastern Univ., Shenyang, China)

8G-6 (Time: 16:40 - 17:00)
TitleOrthotropic XFEM Approach for Fracture Analysis of Composite Media
Author*Soheil Mohammadi (Univ. of Tehran, Iran), Alireza Assadpour (Sharif Univ. of Tech., Iran)


Session 6H   Health monitoring
Time: 10:00 - Friday, April 6, 2007
Location: MR 5, B1F
Chairs: Mitao Ohga (Ehime Univ., Japan), Ranjith Dissanayake (Univ. of Peradeniya, Sri Lanka)

6H-1 (Time: 10:00 - 10:20)
TitleReliability based bridge network evaluation
AuthorMitao Ohga (Ehime Univ., Japan), Ranjith Dissanayake (Univ. of Peradeniya, Sri Lanka), *Kamal Karunananda (Ehime Univ., Japan)

6H-2 (Time: 10:20 - 10:40)
TitleMaintenance planning of bridges
Author*Ranjith Dissanayake (Univ. of Peradeniya, Sri Lanka)

6H-3 (Time: 10:40 - 11:00)
TitleA method for remaining fatigue life estimation of existing riveted railway bridges
AuthorMitao Ohga, *Siriwardane Sudath Chaminda (Ehime Univ., Japan), Ranjith Dissanayake (Univ. of Peradeniya, Sri Lanka), Kazuhiro Taniwaki (Ehime Univ., Japan)

6H-4 (Time: 11:00 - 11:20)
TitleEvaluation technology of damage detection for existed ancient architectures
Author*Ailan Che, Xiurun Ge (Shanghai Jiaotong Univ., China), Takahiro IWATATE (Tokyo Metropolitan Univ., Japan)

6H-5 (Time: 11:20 - 11:40)
TitleA reliability approach in condition assessment of I girder concrete bridges
AuthorMitao Ohga, *I.M.S. Waruna Kumara (Ehime Univ., Japan), Ranjith Dissanayake (Univ. of Peradeniya, Sri Lanka), Kazuhiro Taniwaki, Kamal Karunananda (Ehime Univ., Japan)

6H-6 (Time: 11:40 - 12:00)
TitleSupport Vector Machine (SVM) for Predicting the Settlement of Foundation
Author*Hong-bo Zhao (Henan Polytechnic Univ., China), Shun-de yin (Univ. of Waterloo, Canada), Zhong-laing Ru (Henan Polytechnic Univ., China)


Session 7H   Computational meso/ micro/ nano mechanics 1
Time: 13:00 - 14:40 Friday, April 6, 2007
Location: MR 5, B1F
Chairs: Ya-Fang Guo (Beijing Jiaotong Univ., China), Shuhong Wang (Northeastern Univ., China)

7H-1 (Time: 13:00 - 13:20)
TitleThe problems of the construction of many-body potentials
AuthorGennady M. Poletaev, *Mikhail D. Starostenkov (Altai State Technical Univ., Russian Federation)

7H-2 (Time: 13:20 - 13:40)
TitleResonance phenomena in the method of molecular dynamics.
AuthorNikolay Medvedev (Biysk Pedagogical State Univ., Russian Federation), Olga Pozhidaeva (Altay State Technical Univ., Russian Federation), Olga Tereschenko (Biysk Pedagogical State Univ., Russian Federation), *Mikhail Starostenkov (Altay State Technical Univ., Russian Federation)

7H-3 (Time: 13:40 - 14:00)
TitleThe simulation of tilt grain boundaries in fcc metals
AuthorGennady Poletaev, Roman Rakitin (Altai State Technical Univ., Russian Federation), Dmitry Sinyaev (Siberian State Industrial Univ., Russian Federation), *Mikhail Starostenkov (Altai State Technical Univ., Russian Federation)

7H-4 (Time: 14:00 - 14:20)
TitleStudy of structure evolution at a crack tip in bcc-iron by atomistic simulations
Author*Ya-Fang Guo, Wen-Ping Wu, Yue-Sheng Wang (Beijing Jiaotong Univ., China)

7H-5 (Time: 14:20 - 14:40)
TitleMicrostructural Modeling of Grain Subdivision and Large Strain Failure Modes in F.C.C. Crystalline Materials
Author*M.A. Zikry, O. Rezvanian (North Carolina State Univ., United States)


Session 8H   Computational meso/ micro/ nano mechanics 2
Time: 15:00 - 18:20 Friday, April 6, 2007
Location: MR 5, B1F
Chairs: Shuhong Wang (Northeastern Univ., China), Ya-Fang Guo (Beijing Jiaotong Univ., China)

8H-1 (Time: 15:00 - 15:20)
TitleEffect of Heterogeneous Phase Microstructure on Creep and Damage Evolution of Two-phase Nickel-base Monocrystal
Author*Yun-Qiang Guo (Northwestern Polytechnical Univ., China), Ke-Shi Zhang (Guangxi Univ., China), Xiao-Liang Geng (Northwestern Polytechnical Univ., China)

8H-2 (Time: 15:20 - 15:40)
TitleMulti-scale elastoplastic analysis based on implicit homogenization method
Author*Takashi Asada, Nobutada Ohno (Nagoya Univ., Japan)

8H-3 (Time: 15:40 - 16:00)
TitleModelling of the anisotropy effects on the extent of the EDZ surrounding rock opening
Author*Shuhong Wang (Northeastern Univ., China), Seokwon Jeon (Seoul National Univ., Republic of Korea), Nan Zhang (Northeastern Univ., China), Chun-an Tang (Dalian Univ. of Tech., China)

8H-4 (Time: 16:00 - 16:20)
TitleDesign and simulation of flow switch for microfluidic devices
Author*Moubin Liu (Nanyang Technological Univ., Singapore)

8H-5 (Time: 16:20 - 16:40)
TitleMultiphase flow modeling for microfluidics in biotechnology
Author*Moubin Liu (Nanyang Technological Univ., Singapore), Paul Meakin, Hai Huang (Idaho National Laboratory, United States)

8H-6 (Time: 16:40 - 17:00)
TitleFinite volume solution of micro to nano gas flows using second-order slip conditions
Author*Masoud Darbandi, Farhad Rikhtegar (Sharif Univ. of Tech., Iran)

8H-7 (Time: 17:00 - 17:20)
TitlePerformance evaluation of Generalized Lattice Boltzmann method for 3D incompressible fluid flow simulation
AuthorA. R. Rahmati, *M. Ashrafizaadeh (Isfahan Univ. of Tech., Iran)


Session 6I   (Organized Workshop) Characterization of strength of materials and structures 2
Time: 10:00 - 11:50 Friday, April 6, 2007
Location: MR 6, B1F
Chairs: Goangseup Zi (Korea Univ., Republic of Korea), Junichi Okada (Univ. of Tokyo, Japan)

6I-1 (Time: 10:00 - 10:40)
Title[Keynote] Developments in Multiscale Analysis for Virtual Prototyping and Testing of Woven Fabrics
Author*Colby Swan (Univ. of Iowa, United States), Xiaolin Man (Third Wave Systems, United States), Jun Yang (Univ. of Iowa, United States)

6I-2 (Time: 10:40 - 11:10)
TitleHomogenization of thin plates with cellular miscrostructures
Author*Isao Saiki, Hirotaka Honda, Tetsuo Iwakuma (Tohoku Univ., Japan)

6I-3 (Time: 11:10 - 11:50)
TitleNano-scale thin film behavior considering surface size effect
AuthorJin Bok Choi, Kwang-Sub Jung, *Maenghyo Cho (Seoul National Univ., Republic of Korea)


Session 7I   (Organized Workshop) Characterization of strength of materials and structures 3
Time: 13:00 - 14:40 Friday, April 6, 2007
Location: MR 6, B1F
Chairs: Hongwu Zhang (Dalian Univ. of Tech., China), Isao Saiki (Tohoku Univ., Japan)

7I-1 (Time: 13:00 - 13:30)
TitleFinite Element Homogenization Methods for the Analysis of Myocardial Mechanical Characteristics Based on Intracellular Structures
Author*Jun-ichi Okada (JST / Univ. of Tokyo, Japan), Toshiaki Hisada (Univ. of Tokyo, Japan)

7I-2 (Time: 13:30 - 14:10)
Title[Keynote] Recent Results in Multiscale Model-Based Simulation of Material Responses
Author*Zhen Chen, Yong Gan (Univ. of Missouri-Columbia, United States), Luming Shen (Monash Univ., Australia)

7I-3 (Time: 14:10 - 14:40)
TitleMicro-macro coupled analysis based on polycrystalline homogenization method
Author*Yuichi TADANO (Keio Univ., Japan), Mitsutoshi KURODA (Yamagata Univ., Japan)


Session 8I   (Organized Workshop) Characterization of strength of materials and structures 4
Time: 15:00 - 16:40 Friday, April 6, 2007
Location: MR 6, B1F
Chairs: Colby Swan (Univ. of Iowa, United States), Yuichi Tadano (Keio Univ., Japan)

8I-1 (Time: 15:00 - 15:40)
Title[Keynote] The Simulation of Friction Stir Welding with Consideration of Recrystallization Phenomenon
Author*Hongwu Zhang, Z. Zhang, J. T. Chen, Y. L. Liu, J. Bie (Dalian Univ. of Tech., China)

8I-2 (Time: 15:40 - 16:10)
TitleA study of intragranular deformation effect on macroscopic strength in two-scale finite element analysis for polycrystalline metals
Author*Ikumu Watanabe (Tohoku Univ., Japan), Eduardo Alberto de Souza Neto, Djordje Peric (Univ. of Wales, Swansea, Great Britain), Kenjiro Terada (Tohoku Univ., Japan)

8I-3 (Time: 16:10 - 16:40)
TitleGlobal-local finite cover method for structures involving local heterogeneities and propagating cracks
Author*Kenjiro Terada, Mao Kurumatani (Tohoku Univ., Japan)